Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Recessed TV feature wall with EasyVJ panels

ProjectPete
Kind of a Big Deal
ProjectPete
ProjectPete
Kind of a Big Deal

A plain brick wall was transformed into a gorgeous feature using easyVJ panels.

 

 

wall1.jpeg

 

The project

 

At my wife's request I got to work on this recessed TV feature wall in our living room and we're so happy with how it turned out. It may come as a surprise, but this isn't out of reach for the average D.I.Yer so don't be scared to give this one a go.

 

To create the niches, I just fixed a 90mm timber batten to the very edge of our standard flat brick wall to extend it. I then filled the gap and join as both materials are pencil round, sanded back and repainted. Seamless. The bottom of the conduits and the powerpoints are also recessed and hidden behind the TV unit.

 

Panels: Easycraft easyVJ panels. Made-to-order with 63mm spacing.

Paint: Dulux Lexicon Quarter

Timber shelves: French Oak to match the TV unit

 

wall2.jpeg

 

Before and after

 

FB_IMG_1615243357011.jpg

 

wall1.jpeg

 

More panelling projects

 

ProjectPete also used Easycraft easyVJ 63mm panelling on his kitchen island and painted with British Paints Mossy Road.

 

StevieB_0-1625130746908.jpeg

 

Bunnings Workshop member kingj11 used three 1m wall panels painted in Dulux Paris Green Matte to create this stunning feature wall and finished it with a Tasmanian Oak trim.

 

StevieB_1-1625130755993.jpeg

 

Comments
Mwilson
Getting Established

Hello this is so bloody beautiful this is exactly what I want in my lounge room my husband has been trying to convince me but I couldn’t put the picture and layout together but this is beautiful can u let me know every step to recess the tv in the wall like that pls. Where r the cords how do u access the cords also what is behind that wall to. 

MitchellMc
Bunnings Team Member
Bunnings Team Member

Hi @Mwilson,

 

Let me mention @ProjectPete, so he is alerted to your questions. Hopefully, he'll be able to provide more information on his project.

 

You might also like to have a read through the comments on Pete's original discussion post: Recessed TV feature wall with easyVJ panels. He goes into a bit more detail on how he created the recess.

 

Mitchell

 

ProjectPete
Kind of a Big Deal

@Mwilson I'm glad you love it! It's certainly been a hit and a project I'm really proud of.

 

At a high level...

 

Frame/box the wall our with 90x35 pine as you total protrusion from wall will then equal 90mm + thickness of chosen panelling and adhesive. You need to make sure it's enough to encase your TV based on how much it protrudes from the wall with your TV bracket. If it's more than 90-100mm I'd suggest getting a new slimline TV bracket.

 

The TV recess should be made big enough to have a 50-70mm border around the TV. This gives ample room to put the TV on and off the wall. Note - You won't be able to increase the size of your TV so make sure you get the TV size right that you'll be happy with for years to come.

 

The cords are hidden with in-wall conduits. If you don't already have these they're not too difficult to do yourself but there are some risks involved. For this part, pay a sparky about $450 to do them for you - will save a lot of time, hassle and mess.

 

We're in Perth WA where 99% of houses are brick. You can achieve this on a timber stud frame wall or brick - in fact a stud wall would be a bit easier as you don't have to drill into brick so many times.

 

Frame/trim your recesses with 20x12 or 20x12 ali angle trims from Bunnings. Prime them first then paint to match.

 

This should give you something you start with 👍

Meg22
Just Starting Out

@ProjectPete 

Hi, looks fantastic! I can see you went over the top of the skirting boards - did you pack out the top to make it level? I am wanting to do the same and cover the skirting boards too. Thanks

ProjectPete
Kind of a Big Deal

@Meg22 I removed the skirting on the wall before framing the wall out with 90mm timber. The 90mm gives a consistent depth over the whole wall.

 

Does that answer your question?

MitchellMc
Bunnings Team Member
Bunnings Team Member

Welcome to the Bunnings Workshop community @Meg22. It's brilliant to have you join us, and many thanks for your question about this incredible project.

 

It's great to see @ProjectPete has already got back to you. Were you thinking of giving a project like this a go? I trust our helpful community will be keen to assist. If you'd like to start a discussion on your project, I'm sure our members will be full of practical advice.

 

Please reach out if you need further assistance, and I can't wait to hear more about your project.


Mitchell
 

thuyan
Just Starting Out

Hi,

I am new to this DIY

i recently discover my new inspiration is to doll up my house!! 
I am really bad at installing things together 

I am very inspired by the vj panel. But I do not think I could pull it off. Is that the kind of services Bunnings would offer? Or you could recommend me to someone please 

 

Im looking to hearing from you

MitchellMc
Bunnings Team Member
Bunnings Team Member

Welcome to the Bunnings Workshop community @thuyan. It's wonderful to have you join us, and many thanks for your question about installing VJ panelling.

 

Installing wall panelling would be a fantastic start to your D.I.Y. journey. You'll need a minimal amount of tools, and just about all the steps a very straightforward. Our members will be with you throughout the project, offering advice and encouragement. If you get stuck, I'm sure we'll be able to help you with anything you need.

 

Have a read through this step-by-step article on How to create a VJ feature wall, and check out the video below. As you'll see, most of the steps are quite easy, and with our help, I trust you'll have a fantastic feature wall in no time.

 

Installing wall panelling is not a service we currently provide, but if you'd like to employ someone to do this job for you, I'd suggest checking websites like Airtasker or Hipages.

 

Please let me know if you have any questions.

 

Mitchell

 

 

ChrisandKacey
Just Starting Out

@ProjectPete we're looking at installing these panels onto our brick wall that has gyprock already (typical Perth house). What do you suggest we do to secure these to the wall? Any advise would be great! Thanks.

MitchellMc
Bunnings Team Member
Bunnings Team Member

Welcome to the Bunnings Workshop community @ChrisandKacey. It's wonderful to have you join us, and many thanks for your question about installing panelling on a brick wall.

 

You might like to have a read through these two discussions: How to install Vj Panels on rendered and plastered brick and How to attach Vj board to brick walls? You'll find details of the Easycraft requirements of installing timber batons over the surface before installing their boards and details from @ProjectPete on how he installs over a brick wall without them.

Please let me know if you have any questions.

Mitchell
 

Dave-1
Home Improvement Guru

Good afternoon @ProjectPete 

Man the things you see when you scroll through projects! I love this thinking outside the square, I really wouldnt have thought of doing this on a brick wall. It just wouldnt have occured to me. It gives depth and is a lot more please to the eye. How did you come up withthe idea?

 

Dave

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects