Thanks @CarlosA! As @EricL said, 2mm either side is sufficient.
The problem is, walls are rarely straight/square so you need to measure at 3 points ...
@Kaz27
Grab some 50x25 H3 Pine (0051003) to use as a frame. Fix these to the top and bottom rails.only using 14g 50mm Bugle Metal Teks (0115705). T ...
You need to leave an expansion gap around the panels (top and bottom and where the sides butt up to a wall).
Filling these gaps somewhat defeats th ...
@ProjectPete
Hi Mate,
Great Job!
I would like to know, Did you cut it to the exact length or a few mms short to allow you to fit between walls?
If so ...
Hi,
I want to attach the specriite pre-oiled merbau alternating slat fence panel to a colourbond fence. Is there a way to directly attach it to the to ...
Looking great so far @Krause. So pleased to see you've been inspired by @ProjectPete's fantastic Kitchen island EasyVJ panelling project.
Please pro ...
Thanks @CarlosA! As @EricL said, 2mm either side is sufficient.
The problem is, walls are rarely straight/square so you need to measure at 3 points ...
@Kaz27
Grab some 50x25 H3 Pine (0051003) to use as a frame. Fix these to the top and bottom rails.only using 14g 50mm Bugle Metal Teks (0115705). T ...
You need to leave an expansion gap around the panels (top and bottom and where the sides butt up to a wall).
Filling these gaps somewhat defeats th ...