Workshop
Start a discussion
since July 2020
December
Razzer
Junior Contributor
  • My latest posts
  • Posts I liked
  • My liked posts

User's latest posts

Razzer
Junior Contributor
October

Gday @itsme_prasoon Any wet and dry Vac will do, just as long as its got a large enough storage bin. I used to have a small dust extractor and it did ...

Razzer
Junior Contributor
1 reply
October

@RTDavis Sorry for the delay. All work and no play. I used formply on mine. Easier to clean mess from it and nothing sticks to it. I will be putt ...

Razzer
Junior Contributor
10 replies
January 2021

I did look at that unit. The no dust extraction did put me off of it. But you can use PVC if you have the spare time to add to it. Where the disc is, ...

Razzer
Junior Contributor
December 2020

Gday @Noyade I only use this saw for docking. So no mitre cuts, I use the table saw to do mitre cuts. I may change the design a little with the new dr ...

Razzer
Junior Contributor
December 2020

Gday @MikeTNZ Yep I built everything, the draw sides took forever to cut each one. Wish I had the tablesaw back then.

Razzer
Junior Contributor
October 2020

Gday @unsoundguy The track was super easy to cut, I used the dropsaw with the normal blade to cut it. Once I cut it to size, I moved it about 1mm fro ...

Razzer
Junior Contributor
September 2020

Gday @kevinnp Plasterboard is the cheapest option, but I went a different way on lining my garage, as I want to put screws where ever I want. I wen ...

Posts user liked

r23on
Valued Contributor
October

Hi @itsme_prasoon As suggested any wet and dry vac will do the job, However I would look at a good unit which has a very good capacity as you will use ...

Brad
Trusted Contributor
September

By my count there are 17 pieces to make that.Not sure of the width but it looks like you could use a forstner bit to make the inside curves or a large ...

Tara86
Super Contributor
35 replies

We recently had our council hard rubbish clean up so figured it was a good time to organise the storage under our stairs. Our biggest problem was a ...

Kidbuilder
Junior Contributor
9 replies
January 2021

Thank you razzer.the unit it’s self is very good so I would recommend it because it was easy to set up it is stable and easy to use

HyacinthBucket
Budding Contributor
2 replies

Hi This is a project from my previous home. In the first picture you can see a gas fire and alcoves. I took the gas fire out, decorated it and p ...

MikeTNZ
Super Contributor
3 replies
December 2020

@Razzer,So you made all the drawers and stuff for this project?Even if you didn't, that is a really solid effort.I like how it turned out. Cheers,Mike ...

Auzbuilt
Newbie
December 2020

I have been looking around for ideas for my sliding dropsaw set up, thanks for sharing this, I probably won't go as far as this but the concept is som ...

User's liked posts

Razzer
Junior Contributor
October

Gday @itsme_prasoon Any wet and dry Vac will do, just as long as its got a large enough storage bin. I used to have a small dust extractor and it did ...

Razzer
Junior Contributor
1 reply
October

@RTDavis Sorry for the delay. All work and no play. I used formply on mine. Easier to clean mess from it and nothing sticks to it. I will be putt ...

Razzer
Junior Contributor
10 replies
January 2021

I did look at that unit. The no dust extraction did put me off of it. But you can use PVC if you have the spare time to add to it. Where the disc is, ...

Razzer
Junior Contributor
December 2020

Gday @Noyade I only use this saw for docking. So no mitre cuts, I use the table saw to do mitre cuts. I may change the design a little with the new dr ...

Razzer
Junior Contributor
December 2020

Gday @MikeTNZ Yep I built everything, the draw sides took forever to cut each one. Wish I had the tablesaw back then.

Razzer
Junior Contributor
September 2020

Gday @kevinnp Plasterboard is the cheapest option, but I went a different way on lining my garage, as I want to put screws where ever I want. I wen ...

Razzer
Junior Contributor
2 replies
September 2020

Im on the Mornington Peninsula. Stuck in my house aswell. Its 3m long and 1.9 high. It only took me 2 weeks to build it after work. Im building anothe ...

Razzer's Bookmarks
No posts to display.
Contact Me
Online Status
Offline
Date Last Visited
December