Have purchased a new water tank recently and need to repair our existing pipework coming from the gutter of the shed to the new water tank. As you can ...
After alot of prep work, finally got my pegboards fitted in my garage. The garage is part brick part barn. Had to do a fair bit of work to frame up an ...
Great set up Prawns(?). You've inspired me.
I've been set on replacing my pegboard with french cleat system (added in pic below before I took it do ...
Which ones are actual pegboard hooks in the link you sent Eric? They don't all appear to be.
My frustration with peg board hooks are they're always ...
Hi Eric, Thanks for that info. For my frame I was thinking of this pine:https://www.bunnings.com.au/porta-42-x-30mm-2-4m-dar-pine-standard-better_p00 ...
I saw a post by @lcooksey88 showing his cool shed setup in this group. He used some pinnacle pegboards so I decided to give them a go also. I bought x ...
Hi Ash (@mrpatel), Your plan sounds solid and should work just fine for repairing the fence. Removing the pickets, measuring the rails in their curren ...
Hi @mrpatel,
To ensure the posts for your picket gate are secure, they’ll need to be connected directly to the structural frame beneath the decking, ...
Hi @mrpatel
Thanks for posting that update, you're now in a better position to determine which side of the panel to use. In regards to the stain, i ...
Hello @mrpatel
Your drawing looks fantastic and very detailed. If you've drawn your timber pieces to scale, I suggest drawing in the proposed posit ...
That timber is fine, @mrpatel. If the box is going outside, I'd recommend painting or coating the timber with polyurethane to protect it from the weat ...
Hi Ash (@mrpatel),
There's not enough room between the top of the concrete slab and the door threshold to create a conventional deck within this spa ...
Welcome to the Bunnings Workshop community @mrpatel. It's wonderful to have you join us, and many thanks for your question about laying decking.
It' ...
After alot of prep work, finally got my pegboards fitted in my garage. The garage is part brick part barn. Had to do a fair bit of work to frame up an ...
Great set up Prawns(?). You've inspired me.
I've been set on replacing my pegboard with french cleat system (added in pic below before I took it do ...
The decking timber is not long enough to go flush to the ends, I bought the desired length of decking to allow for a border on the top.I do want to co ...
Hi Mitchell, So I have pulled the decking out and exposed the tiles. They were all very stuck down, so a lot of residue on the tiles, but also a fair ...
Hi Mitchell, Few more questions: 1 - I know I'm not floating my joists, but rather using dynabolts to secure them to the tile floor, however, do you ...
Thanks Mitchell! Great advice and I could probably pull this off with my limited diy experience:) Couple more question (for now!). Thoughts on laying ...
I would like to rebuild our front decking and want some tips on how best to go about it.
The front decking we have is fairly old and worn and was laid ...