Hi team, I was building this over the past couple of weeks, about to complete it. Now for the finer details, what spray paint colour will best match t ...
Thank you @MitchellMc.
One more question, if I may, which is something I haven’t quite been able to solve for.
Since the deck will be approximately ...
Thanks @JacobZ
I’ll be purchasing the timber from Bunnings, so I’ll refer to the Hyne bearer span tables as you suggested.
Some follow-ups question ...
Thanks @JacobZ , appreciate the response and advice.
That’s interesting, most (if not all) bearer span table I’ve checked specifies double bearers.
Co ...
Hi everyone,
I’m planning to build a low, free-standing deck and would appreciate some advice before I start.
Deck details:
Dimensions: 7000mm (L) × ...
Hi, I just got keys to my place, and I need to perform some basic landscape at the backyard.
Currently, the backyard is uneven, and its level is much ...
Thank you Jacob - this is very helpful. I’ll grab a moisture meter just in case as the paint is peeling off the entire wall - it’s not just a small lo ...
For the rim joist on that side, before installation, I would connect a second 90 x 45mm on its edge @simont. Use timber bugle screws to hold them toge ...
Hello @simont
If you were to remove the material thickness of the frame H3 70x35 and decking panel 19mm from your available space of 110mm you woul ...
Hi @simont,
That's correct, 20mm pavers on top of the existing pavers and then the joist resting on top. You can use wedges and shims instead, but y ...