About Taco | Bunnings Workshop community

Ask a question

since

June

Growing in Experience

Total posts 14
Total likes 8
Joined 18 June 2024

My latest posts
Posts I liked
My liked posts

Growing in Experience

1 reply

Hi, Looking to follow manufacturers instructions , could you please advise what 10mm foam,etc I can use as per attached picture to pack perimeter? Tha ...

Growing in Experience

2 replies

Hi Jacob, Thanks for your reply Cant get the panel off really , it's like this around most of the shed , and they are full colorbond panels and edgin ...

Growing in Experience

4 replies

Hi Jacob, Thanks for your reply . Its behind the shed wall and insulation so I can't get to it internally or externally

Growing in Experience

6 replies

Can someone please recommend a colorbond safe rust converter? There is some swarf in an area I can't get to so want to spray some rust converter there ...

Growing in Experience

Thanks again @JacobZ Few options available by the sounds of it, will get a bit deeper in the project then see how we go Appreciate your help

Growing in Experience

3 replies

Thanks for the info @JacobZ So I don't need to do anything with the gap, just cover it with the plasterboard? If I was going double plasterboard what ...

Growing in Experience

5 replies

Hi , I am looking to gyprock the walls in my newly built stud shed. The windows and doors have wood framing from the installation with a timber frame ...

Growing in Experience

Thanks for the info , appreciate it

Bunnings Team Member

1 reply

Hi @Taco, Thank you for your question about installing insulation in your steel-framed shed. It should be installed on the battens, so the insulat ...

Bunnings Team Member

Hi @Taco, Thank you for your question. Do you have any photos of the space? Some measurements of the area would also be handy. This will help our ...

Community Megastar

2 replies

Good Evening @Taco I was wondering if you can supply a few pictures of the area you are describing. I am like @JacobZ in my preference to not build a ...

Bunnings Team Member

Hi @Taco, Thank you for the additional information, If the soil is sandy on top, you may have issues with a concrete slab anyway as they need to sit ...

Home Improvement Guru

2 replies

Hi @Taco With the cost of concrete these days, to cover it over with a deck is essentially throwing money away. I would follow @JacobZ advice and h ...

Growing in Experience

Thanks again @JacobZ Few options available by the sounds of it, will get a bit deeper in the project then see how we go Appreciate your help

Growing in Experience

Thanks for the info , appreciate it

Growing in Experience

1 reply

Thanks for the replies all, bit to think about - seems like its probably beyond me and will need to go with a builder

Growing in Experience

1 reply

Thanks for the reply @JacobZ and @Dave-1 , sorry I should have mentioned my block is full sand so I was concerned that piers wouldn't work in the san ...

Growing in Experience

7 replies

G'Day All , I am looking to build a low level deck to join a shed , patio and bedroom Structures are 100mm,150mm, 130mm above ground, so all relativit ...

Growing in Experience

Thanks @EricL I'll check it out, appreciate it

Growing in Experience

2 replies

Hi, Could someone please recommend a product to seal between this blind frame and bricks? The gap is slightly smaller on the other frame. It will be v ...

Taco's Bookmarks

Go to Bunnings

Online Status	Offline
Date Last Visited	June

What Yellowtongue flooring perimeter foam?

Re: Swarf on colorbond - safe rust converter

Re: Swarf on colorbond - safe rust converter

What rust converter for Swarf on Colorbond?

Re: tud steel shed - Wondows and sliding doors - Temporary packers and gaps -Lining with gyprock

Re: Stud steel shed - Wondows and sliding doors - Temporary packers and gaps -Lining with gyprock

How to Gyprock walls of stud steel shed?

Re: Insulation for ceiling - Steel stud frame shed - strapping ?

Re: Insulation for ceiling - Steel stud frame shed - strapping ?

Re: Excavation / Concereter - What to ask for

Re: Excavation / Concereter - What to ask for

Re: Excavation / Concereter - What to ask for

Re: How to build a low-level deck?

Re: tud steel shed - Wondows and sliding doors - Temporary packers and gaps -Lining with gyprock

Re: Insulation for ceiling - Steel stud frame shed - strapping ?

Re: How to build a low-level deck?

Re: Excavation / Concereter - What to ask for

How to build a low-level deck?

Re: How to seal between blind frame and bricks?

How to seal between blind frame and bricks?

User's latest posts

Posts user liked

User's liked posts