Hi all,
I have secured some decor screen posts to my exposed agregate path. There is a gap between the post foot and the path because washers are u ...
Hi all,
Im about to cut some porcelain tiles. Just wondering which of the following blades work(s) the best and give(s) nice and neat cuts? Or they wi ...
Thank you @JacobZ for the clarification.
I'm going to install KwikFit Plain Pivoting General Purpose Gate Hing to the Jack Matrix post
What screws are ...
Hi @JacobZ ,
Would Ramset 14g x 70mm Black Ankascrew also work? The package suggests that it could hold up to 91kg. Also, my posts and screen panel ...
Thanks @JacobZ for the suggestion. Instead of applying a small bead of silicone around the top edge of the plastic piece (storm grate), what would you ...
Hi @CarlL
These are are all good quality blades, they will provide a superior cut to any tile. But if you are after a smooth contoured finish, I su ...
Hi @CarlL,
I should have mentioned that you should double-check that the 16mm length of the screw is sufficient to go through the hinge and into the ...
Hi @CarlL,
Grout is not waterproof and the aim of adding the bead around the top edge is to stop water from getting in behind the plastic piece. If ...
Hi @CarlL,
Thank you for your question about what screws to use when mounting ProtectorAl decorative panels using ProtectorAl 25 x 20 x 80mm Black E ...
Hi all,
I have secured some decor screen posts to my exposed agregate path. There is a gap between the post foot and the path because washers are u ...
Hi,
Some stems of my lavender are turning brown. Is that a sign of drying/dying? Too much sun?
Over the last 2 months, we have suffered lots of heatwa ...
Hi @Noelle, thanks a lot for your advise. I moved the plants to ground a couple of days ago and added some slow-release fertilisers, have been keeping ...