Hi @MitchellMc So opted for the 19mm fittings.Not sure if i would need a pressure reducer, but i opted for one based on the linked posts.let me know i ...
Thankyou @MitchellMc Ill stick to the 19mm poly pipes, and place emitters where needed. let me go thought my part list and update it to be compatible ...
Thankyou @EricL Is there a reason why 19mm is preferred over 13mm? Is it because 19mm can withstand more pressure and is less prone to disconnect?
C ...
I’m setting up an automated irrigation system for my backyard and would like some advice on my layout and parts list. I’ve attached a marked-up photo ...
Thankyou @JacobZ You are right, I already bought a weed-n-feed that i used last summer and it clearly states its not suited for buffalo lawns .Love t ...
Hi all,I’m looking for some advice on restoring a small patch of grass in my front yard. The grass seems to have died off (my first time dealing with ...
Thankyou @JacobZ This is really helpful, The middle piece/divider seems to be screwed and glued in , so I don’t really want to replace that.
Will fol ...
Hello @SouthFieldSnoop
Yes, you can use screws for the vertical divider, my best advice is to drill pilot holes for a clean precise entry. I'm sorr ...
Hello @SouthFieldSnoop
I propose using 42 x 19mm 1.8m DAR Pine Premium - 1.8m. There is a 2.4-meter length available, but I suggest checking your l ...
Hello @SouthFieldSnoop
Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about ...
Thankyou @MitchellMc Ill stick to the 19mm poly pipes, and place emitters where needed. let me go thought my part list and update it to be compatible ...
Hi @EricL , @Jewelleryrescue
I completed this over the weekend, and overall, I'm happy with the results. However, one thing I regret is choosing bl ...
Hi @Jewelleryrescue I do like the idea of using a rubber seal to get a cleaner look, I found a similar product here with 38MM width, which would work ...
Hi @EricL ,Thank you so much for your advice! I managed to get everything done over the weekend. I didn’t use Foam Filler since the Bog was sufficient ...
Hi everyone! I'm new to DIY and I'm looking for some advice as I work on renovating my laundry room. I have a few ideas in mind and would appreciate a ...
