Hi,
My bathroom mixer tap (vanity unit) started to leak quite a lot. I have replaced various washers in taps before but never in a mixer tap. I found ...
Mounting a cordless vacuum on laundry wall, plasterboard, small area unfortunately not able to put on a stud. Tried screw in anchors and the plasterbo ...
Thanks for the advice. I think I'll use the Cabot's new timber prep. The blurb below it on the bunnings website says to follow up with another Cabot's ...
I have been thinking about this weathering process. At this point I haven't had time to screw down more boards. As with painting, am I better off wait ...
Yes,thanks, you have got it right, I had only done the two screws at each end. I was planning to screw to the other joists. Would I need to put 2 scre ...
Thanks, I will consider your suggestion about the Cabot's product. Although, having only just ordered my shed, I guess it might take a month or so to ...
"I don't have the 28 dollar setting tool!"
As per @JacobZ 's abvice @jonathan_d above.
If you have the correct sized hole in the gyprock - you don't ...
I have been thinking about this weathering process. At this point I haven't had time to screw down more boards. As with painting, am I better off wait ...
Yes,thanks, you have got it right, I had only done the two screws at each end. I was planning to screw to the other joists. Would I need to put 2 scre ...
Hi, I went ahead with the timber frame idea. I dug out the area to make it a bit flatter and at the lowest point I put 3 DEKO 250x250x150 blocks to su ...
Hi, new to this forum, thank you for having me! I have recently moved house and we seem to have much less storage space for outdoor type things such a ...
