-
How to replace deck balustrade?
Does anybody have any ideas on what I could do here to remove the balustrade and open my house deck up to my backyard? I dislike the closed off feeling but put the balustrade in to stop the kids falling off the deck when I moved in. Was already thinking 2 tapered stairs all the way across or a ramp? One end of the deck is…
-
Can I use grout instead of render to cover bricks?
Am I able to use exterior grout instead of render to cover these bricks?
-
How to build a deck from the house to fence?
Looking for some advice on the best way to build a deck out from my new sliding door out to the fence (over the garden bed). 1. What should I use as the anchor point in the garden bed? 2. Can I run a bearer from the house out to this with it supported on top of the sleeper? 3. Do I need to support over the concrete space…
-
How to change a shower head?
Hoping to get some advice on what the options are for me to change my shower head from a single fixed head to a combination. What I have what I’m after. Thanks
-
How to add an external sliding door?
Hi all, I’m wanting to replace the window in my second living room/office with a sliding door. 1810mm wide x 2400mm high or thereabouts. I want to provide more access to my side yard and add some light into the room. I’ve had a couple of quotes for about $2500 with me supplying all the materials (so about 4-5k). I feel…
-
How to cut VJ panelling around a split system?
Hi Community, Hoping someone might be able to help with an easy way to cut a VJ panel sheet to go around my split system. Is there some way to mould the shape then transfer it onto the panel? Thanks in advance!
-
How to cut decking board to fit around stormwater pipe?
Hi all, I’m building a deck for my brother (with plans I got from the various other contributors on this portal). What’s the best way to be able to trace the stormwater pipe and transfer it onto a decking board to get some snug fits?
-
How to end VJ panelling?
Wondering how one would end VJ panelling boards above where the doorway starts to the cornice area. Don’t want to use an obvious piece of quad or similar.
