-
Double garage and workshop build
A timber-framed double garage and workshop build that includes a mezzanine level for storage, an epoxy floor and LED strips with brackets created on a 3D printer. The project I've been building a 12 x 6m timber-framed double garage and workshop with a friend, who is a retired builder. When I originally had this and our…
-
Timber framed double garage and workshop build
G’day one and all, Ive just come across this site - how awesome is it! Anyway i’ll kick off my fist post with my 12x6 timber framed double garage and workshop I’ve been building over the last three weeks with my friend who’s a retired builder. It’s soooo close to completion I can almost taste it haha its now at lockup…
-
Mobile CNC router workbench with drawers
This custom-built workbench provides a home for a 6040 CNC (computer numerical control) router, as well as a shelf for the controller and drawers for storage. The project While I was on annual leave I actually got a chance to use my workshop for more than just storage, so I started to organise it. The first project was to…
-
Where should I locate ceiling vents in rooms
As a bit of background, we don't have any air-conditioning in our current house, but as its an old house (+80 years old) has high ceilings, in summer the house gets very hot, no insulated sarking under roof tin, however there is insulation in the roof space although it looks like its been done poorly and needs replacing.…
-
Customised Small Part Boxes for workshop drawer organisation
I've created some 3D printable parameterised small part boxes for workshop drawer organisation (and the OCD in us) that are fully customisable as I wanted to organise my CNC bits in the drawers of my new CNC table I build and put up a couple of weeks back. CNC / Assembly Table Build They have a label tab that doubles as a…
-
CNC / Assembly table build
Hi all, Seeing I'm on some annual leave I'm actually getting a chance to use my workshop rather than using it for storage. So I've started to organise it. The first project over the last few days has been to build a table for my 6040 CNC that I can wheel around as its been sitting on a fixed table since I emptied out my…
-
How do I flash external vent into corrugated sheet?
Hi all this is a question. I want to put in a vent on the outside of my wall for fume extraction on my laser cutter. The question is how do I flash the vent into the corrugation sheet that is running vertically and water proof it? The colorbond profile I'm mounting the vent into is much like…
