-
How can I fix plasterboard from toilet roll holder bracket?
Happy New Year everyone, Can you help let me know how to mend this wall please? My family accidentally hit the toilet roll holder and the bracket came off. I'm not sure if the wall plug is also the right one to use with this type of wall. Thank you very much
-
How to remove soot from ceiling and walls?
Hi all, We recently had a small fire in our room and there is soot on the ceiling and wall (smoke damage) What is the appropriate product to clean them please? We tried to wipe it off with water but apparently does not work. Thank you very much
-
How to remove putty mark on timber floor?
hi Bunnings team, We have sanded the floor. put in putty before the final 120 grit. Left to cure over night. However, we cannot remove the line of the putty residue with an orbital floor sandee 120 grit the next day. And now we are ended up with stripes across the floor. used timbermate wood filler tried damp rag, turp…
-
How to sand and seal timber floorboards?
Hi Bunnings team, I'm looking to remove the carpet in the living room then sand and seal the wooden floor underneath. I've looked at Bunnings video of sanding/sealing timber floor so it's all good but just want to ask about 1. https://www.bunnings.com.au/kincrome-automatic-centre-punch_p6119128 Is this centre punch…
-
Can you use water based enamel on oil based prep coat?
Hi guys, I am trying to repaint my windows which have paint peeling off due to condensation and aging. i was recommended using Taubman Stain Blocker as prep coat and another Taubman water based enamel product. I am now told that water based will not work with oil based. What should I do? Thank you
-
How to construct bolt down post anchor?
Hi guys, Thank you firstly for holding this forum. I'm looking to reconstruct a pergola which originally had round pole/post. I would like to change to Bolt Down anchor such as pryda-post-anchor-bolt-down I've got some high-strength-concrete-mix Is it sufficient to just wire brush the hole before pour in concrete? Just…
