Hi, I have these hedges in my south facing planter box and want to rip them out for something a bit better as they've started to die off.
Open to a ...
Hi Mitchell,
Thanks for your response. The bedhead is approx 3.6m wide, 1.2m high and 120mm deep. The depth can vary really, was just assuming 120mm ...
Hi again,
Only just getting around to this project now and noticed Bunnings stores here in WA don't stock the 90x45mm untreated pine and don't seem ...
I'm planning on making a built-in bedhead with 90x45mm pine for the framing along with some VJ paneling for the front. Likely use some oak timber for ...
I'm wondering if anyone knows what the standard type of timber is that builders use to make linen cupboard shelves? I don't think it's melamine shelvi ...
Thanks for your help. Do you have any advice on the type of paint that would be suitable for a wet area as it's inside the shower so will be getting w ...
I've attached a photo of the hole. There appears to be a smaller one forming in the top left portion and the chrome has peeled off the bottom left of ...
Hi, I have a hole in my chrome shower frame about the size of a 5c piece.
I'm assuming applying some metal filler, sanding and spraying with a chro ...
Thanks to all who have responded so far. I've ordered the Kaboodle cupboards which are 4-6 weeks away and then I'll grab the timber to complete the pr ...
Hi,
I am looking to put a timber bench over my laundry trough and want to use the SpecRite 2200 x 600 x 26mm Beech Laminated Panel. My questions are ...
