Ahhhh Michael, no I did not tighten the inner section with a spanner, only by hand. I thought the outer section with a spanner was all that was requir ...
Hi Mitchell, I appreciate your reply.
As to whether it's the hot or cold tap I am unsure, I felt the water coming out of the bar and it felt cool, b ...
Hi folks',
I have a problem regarding my bathroom sink. I currently have two new spindles installed into the basin top that connects to the T-bar co ...
Hi @JacobZ @Dave-1 ,
Appreciate your insight, I must admit, I'm not surprised to hear you say that the fix for the cracks cause by use of different ...
Howdy @TJP,
Try using a butane torch on a soft flame and carefully lick all the way around the spindle.
This often works for me and if needed I use ...
Good Morning @TJP Im wondering if you are thinking of Acalypha wilkesiana , they have beautiful lush Green, Red , Yellow foliage. Large shrubs. Thr ...
Hello @TJP
Thanks for sharing your question about your wall spout. It appears that there is a nut screwed onto the wall outlet of your spout. Aside ...
Ahhhh Michael, no I did not tighten the inner section with a spanner, only by hand. I thought the outer section with a spanner was all that was requir ...
Hi @JacobZ @Dave-1 ,
Appreciate your insight, I must admit, I'm not surprised to hear you say that the fix for the cracks cause by use of different ...
Hi @Dave-1 @JacobZ
Finally managed to get the third and final coat of the wall done. It's not completely flush with the wall. I was advised to use a ...