Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (EricL)

Images in Profile (EricL)

Album Privacy: Public

Profile (EricL)

  • 3.1 Attach centre post 1535mm to 527mm segment.png
  • 3.2 Attach 2nd middle post 1535mm with 516mm and 527mm segments.png
  • 3.3 Stand frame upright.png
  • 3.4 Attach 1710mm top rail to ends only.png
  • 4.1 Interior cabinet frame 1 yellow.png
  • 4.2 Interior cabinet frame 2 green.png
  • 5.1 Mounting studs.png
  • 5.2 Secure centre posts to top rail.png
  • 6.2 Mark side panel for trimming.png
  • 6.3 Drill pilot hole on side panel.png
  • 6.4 Attach front panel, cut and trim.png
  • 6.1 Position secondary front panel, mark position and trim.png
  • 7.1 Measure, cut and fix bottom panel to frame.png
  • 7.2 Repeat, measure, cut and fix bottom panel to frame.png
  • 8.3 Attach Pine trim top.png
  • 8.2 Measure and cut MDF cabinet sides.png
  • 8.4 Attach Pine trim bottom.png
  • 8.1 Measure and cut MDF cabinet floor.png
  • 8.5 Measure and cut MDF front cover.png
  • 9.3 Measure and cut shelves.png
  • 9.2 Install shelf brackets.png
  • 9.1 Measure distance across each division.png
  • 10.2 Install the trim piece below the top cover of the cabinet.png
  • 10.1 Measure and cut panel to cover the top of the bottom frame and the top of the top frame.png
  • 10.4 Finished cabinet in colour.png
  • 10.3 Finished cabinet.png
  • 10.1 Measure and cut panel to form the cabinet's benchtop and to cover the top frame.png
  • 1.3 Clamp Kreg jig to timber.png
  • 1.4 Drill into wood.png
  • 1.1 Measure wood.png
Workshop Resources Our Sites
Quick Links
Go to Bunnings