Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (Adam_W)

Images in Profile (Adam_W)

Album Privacy: Public

Profile (Adam_W)

  • Step 10.2 Attach triangle support bracket to seat.jpg
  • Step 11 Position seats and screw to corner posts.jpg
  • Step 12 Add support rails to short sides of inside of bed.jpg
  • Step 13.1 Mark centre of bed between rails.jpg
  • Step 13.2 Fit centre support.jpg
  • Step 14.1 Add sleepers to rails.jpg
  • Step 14.2 Screw sleepers down with 75mm screws.jpg
  • Step 15.2 Fill bed with soil and compost.jpg
  • Step 15.1 Cover base with drianage fabric.jpg
  • Step 16 Optional step Dress seats with treated pine decking.jpg
  • Step 17.2 Mulch well.jpg
  • Step 17.1 Plant out the bed.jpg
  • Step 1 - Measure mark and cut all sleepers.jpg
  • Step 2 - Create corners from 600mm lengths.jpg
  • Step 3 - Position sleeper in corner align and secure.jpg
  • Step 4.1 Add sleeper section to long face of corner and secure.jpg
  • Step 4.2 Check corners with square.jpg
  • Step 7.1 Cut 90 x 45 for seat rails.jpg
  • Step 5 Add remaining side boards.jpg
  • Step 6 Measure between corner posts on sides that will have seats.jpg
  • Step 7.2 Mark 50mm in from edge of cut sleeper and position rail.jpg
  • Step 8 Roll over and secure with 100mm screws.jpg
  • Step 9.1 Measure between seat rails.jpg
  • Step 9.2 Attach rail to bed face.jpg
  • Step 10.1 Use square at 45 to mark a series of triangles.jpg
  • Step 10.2 Attach triangle support bracket to seat.jpg
  • Step 11 Position seats and screw to corner posts.jpg
  • Step 12 Add support rails to short sides of inside of bed.jpg
  • Step 13.1 Mark centre of bed between rails.jpg
  • Step 13.2 Fit centre support.jpg
Workshop Resources Our Sites
Quick Links
Go to Bunnings