Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (MitchellMc)

Images in Profile (MitchellMc)

Album Privacy: Public

Profile (MitchellMc)

  • 2.1 Select a sturdy base pallet with minimal damage..jpg
  • 3.1 Use a pinch bar to remove boards..jpg
  • 3.3 Mark the height of runner..jpg
  • 3.4 Countersink holes for coach screws..jpg
  • 3.2 First board removed..jpg
  • 3.5 Pre-drill timber for coach screws..jpg
  • 3.7 Fix upright posts into place..jpg
  • 3.6 Check the upright post is straight before fixing..jpg
  • 3.8 Fixed upright post..jpg
  • 4.2 Pre-drill holes in blocks..jpg
  • 4.1 Mark height of runner..jpg
  • 4.4 First board screwed down..jpg
  • 4.3 Blocks installed..jpg
  • 4.6 Continue down the pallet..jpg
  • 4.8 Completed floor..jpg
  • 4.7 Fill gaps on outside of posts..jpg
  • 4.5 Remove boards in the wrong place as you lay new boards..jpg
  • 5.1 Measuring distance between uprights..jpg
  • 5.3 Screw at a 45-degree angle from the top and below..jpg
  • 5.2 Install horizontal beams..jpg
  • 5.4 Two horizontals joined to a vertical post..jpg
  • 6.4 Screw roof supports into upright posts..jpg
  • 6.3 Pre-drill holes in roof supports to fix into vertical posts..jpg
  • 6.1 A 45-degree cut on one end of the roof supports..jpg
  • 6.2 Pre-drill holes in the 45-degree join..jpg
  • 6.5 Roof supports in position..jpg
  • 7.1 Cut to length and position upright division board..jpg
  • 7.2 Screw into position top and bottom..jpg
  • 7.4 Create a side-door division..jpg
  • 7.3 Fix a horizontal board to create windon division..jpg
Workshop Resources Our Sites
Quick Links
Go to Bunnings