Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (EricL)

Images in Profile (EricL)

Album Privacy: Public

Profile (EricL)

  • Hero 1 (1).png
  • Step 1.2 Drain tap.png
  • Step 1.1 turn off mains water.png
  • Step 2.2. Lever handle removed.png
  • Step 2.1 Locate grub screw in lever and pin type tap handle.png
  • Step 2.3 T-Handle grub removed.png
  • Step 2.4 Position tool to line up with slots.png
  • Step 2.6 Plastic cover lifted.png
  • Step 2.7 Remove nut plastic handle.png
  • Step 2.5 Position shifter on locking nut.png
  • Step 2.5 Position shifter on locking nut.png
  • Step 3.3 Remove spindle cover.png
  • Step 3.1 Spray with WD-40.png
  • Step 3.2 Cut silicone.png
  • Step 4.4 Use pliers to remove old tap valve.png
  • Step 4.2 Remove spindle by hand.png
  • Step 4.1 Adjust shifter turn to loosen.png
  • Step 4.3 Tap valve left inside tap body.png
  • Step 5.2 Remove spindle from brass body.png
  • Step 5.1 Prepare repair parts for spindle.png
  • Step 5.4 Apply lubricant on new O rings.png
  • Step 5.3 Change O rings.png
  • Step 5.6 Replace felt O ring.png
  • Step 5.5 Insert new tap valve at bottom of spindle and line up with tap base.png
  • Step 5.8. Tap washer replaced.png
  • Step 5.7 Screw spindle back on.png
  • Step 2.2. Lever handle removed.png
  • Step 1.2 Drain tap.png
  • Step 2.1 Locate grub screw in lever and pin type tap handle.png
  • Step 1.1 Turn off mains water tap.png
Workshop Resources Our Sites
Quick Links
Go to Bunnings