Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (EricL)

Images in Profile (EricL)

Album Privacy: Public

Profile (EricL)

  • Step 4.2 Transfer measurments to benchtop.png
  • Step 4.3 Cut benchtop with circular saw.png
  • Step 4.4 Sand cut edge of benchtop.png
  • Step 4.1 Double check shelf measurements.png
  • Step 4.6 Place benchtop on bottom and top shelf.png
  • Step 4.5 Drill kreg mounting holes.png
  • Step 5.1 Measure MDF panel..png
  • Step 5.4 Screw MDF panel to drawer frame.png
  • Step 5.2 Cut MDF panel..png
  • Step 5.3 Fit MDF panel to drawer frame.png
  • Step 6.1 Mark 300mm from bottom of top shelf.png
  • Step 6.3 Drill pilot holes drawer side.png
  • Step 6.2 Use clamps to position drawer side.png
  • Step 7.3 Pull release clip down to remove drawer slide main body.png
  • Step 7.4 Drawer slide body removed..png
  • Step 7.1 Position drawer slide just under MDF panel.png
  • Step 7.2 Screw drawer slide to shelf..png
  • Step 7.5 Drill drawer body to middle of drawer side..png
  • Step 7.6 Insert drawer into drawer slide body..png
  • Step 7.7 Test drawer..png
  • Step 8.2 Mark position of holder.png
  • Step 8.3 Drill pilot hole.png
  • Step 8.1 Position tool and timber holder.png
  • Step 8.4 Screw from the bottom.png
  • Step 8.5 Holders in place.png
  • Step 9.3 Screw position for wheel support.png
  • Step 9.2 Position pilot hole for leg support.png
  • Step 9.4 Position of wheel on bottom leg.png
  • Step 9.1 Clamp wheel suuport between legs.png
  • Step 9.5 Wheels installed.png
Workshop Resources Our Sites
Quick Links
Go to Bunnings