Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (Adam_W)

Images in Profile (Adam_W)

Album Privacy: Public

Profile (Adam_W)

  • A plain countersunk head screw
  • A hex head screw
  • A Phillips head screw
  • A square drive screw
  • A needle point screw
  • A self-tapping screw
  • Adjust the clutch on your drill-driver
  • Light disc.jpg
  • Step 1.3 find the cut point.jpg
  • Step 1.2 measure light strip.jpg
  • Step 1.1 sand off sharp edges.jpg
  • Step 2.1 Position and mark for control unit.jpg
  • Step 2.3 check size is correct.jpg
  • Step 2.2 drill clearance holes in corners.jpg
  • Step 3.3 apply adhesive and firmly position.jpg
  • Step 3.4 Screw down.jpg
  • Step 3.1 measure and mark for centre of the front disc.jpg
  • Step 3.2 use radius marker to mark for rear disc.jpg
  • Step 4.2 Seal or paint front of disc.jpg
  • Step 4.1 Seal rear of discs.jpg
  • Step 5.3 Attach packer.jpg
  • Step 5.1 Find top centre and attach hanger.jpg
  • Step 5.2 Attach light strip.jpg
  • Step 6.1 Position hanger on wall.jpg
  • Step 6.2 Hang your new light disc.jpg
  • Step 6.3 Finished.jpg
  • Step 1.3 find the cut point.jpg
  • Step 2.1 Position and mark for control unit.jpg
  • Step 1.2 measure light strip.jpg
  • Step 1.1 sand off sharp edges.jpg
Workshop Resources Our Sites
Quick Links
Go to Bunnings