Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (Adam_W)

Images in Profile (Adam_W)

Album Privacy: Public

Profile (Adam_W)

  • Timber privacy screen on deck.png
  • Step 1 Measure top and bottom.jpg
  • Step 2.3 Break out cut sections with chisel.jpg
  • Step 2.1 Clamp cut pieces down.jpg
  • Step 2.2 Make multiple cuts through marked area.jpg
  • Step 3 Fit riser blocks.jpg
  • Step 5.1 Assemble the frame.jpg
  • Step 5.2 Drill pilot holes.jpg
  • Step 5.3 Countersink for heads of 100mm screws.jpg
  • Step 6 Position frame.jpg
  • Step 7 Position and fix off support trim.jpg
  • Step 8 Cut all required slats.jpg
  • Step 8.2 Set a jig to cut spacer blocks accurately.jpg
  • Step 9.1 Place a small blob of adhesive in corner.jpg
  • Step 9.2 Position slat on spacers and fix off.jpg
  • Step 9.3 Position front strip and secure.jpg
  • Step 10 Apply at least two coats of paint.jpg
  • Timber privacy screen on deck.png
  • Step 1 Measure top and bottom.jpg
  • Step 2.1 Clamp cut pieces down.jpg
  • Step 2.3 Break out cut sections with chisel.jpg
  • Step 2.2 Make multiple cuts through marked area.jpg
  • Step 3 Fit riser blocks.jpg
  • Step 4 Measure and cut sides and centre.jpg
  • Step 5.1 Assemble the frame.jpg
  • Step 5.2 Drill pilot holes.jpg
  • Step 5.3 Countersink for heads of 100mm screws.jpg
  • Step 7 Position and fix off support trim.jpg
  • Step 6 Position frame.jpg
  • Step 8 Cut all required slats.jpg
Workshop Resources Our Sites
Quick Links
Go to Bunnings