Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (Peggers)

Images in Profile (Peggers)

Album Privacy: Public

Profile (Peggers)

  • Step 5.1 Frames now complete.jpg
  • Step 5.3 Frame should be solid.jpg
  • Step 6.2 Leave overnight.jpg
  • Step 6.1 Paint before adding shelves.jpg
  • Step 7.2 Screw base with 40mm screws.jpg
  • Step 7.1 Add base plywood.jpg
  • Step 7.3 Add caster wheels.jpg
  • Step 7.4 Turn up the right way.jpg
  • Step 7.5 Screw in shelves.jpg
  • Step 7.6 Add top panel.jpg
  • Step 8.1 Add hook to side.jpg
  • Step 8.3 Or just your hoody.jpg
  • Step 8.2 Ideal for power cords.jpg
  • Step 9.1 Add plastic trays to complete.jpg
  • Step 9.3 Now make our workbench.jpg
  • Step 9.2 Easy to move around.jpg
  • Step 1.1 Measure lengths of pine to fit base.jpg
  • Step 1.4 Measure widths.jpg
  • Step 1.3 Cut length with saw.jpg
  • Step 1.2 Pencil line to match base.jpg
  • Step 1.5 Lengths and widths to fit base.jpg
  • Step 2.2 Use drill bit for speed.jpg
  • Step 2.1 Drill before screwing together.jpg
  • Step 2.3 Use 2 screws for each join.jpg
  • Step 2.4 Repeat steps for top frame.jpg
  • Step 3.1 Measure base of sides.jpg
  • Step 3.2 Base of side will sit here.jpg
  • Step 3.4 Measure exact sides length.jpg
  • Step 3.3 Height of sides depends on trays.jpg
  • Step 3.5 Trim pine if needed.jpg
Workshop Resources Our Sites
Quick Links
Go to Bunnings