Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (Peggers)

Images in Profile (Peggers)

Album Privacy: Public

Profile (Peggers)

  • 4.1 Paint your frame.JPG
  • 4.3 Add pegboard when paint dry.JPG
  • 4.5 Screw on bench base.JPG
  • 5.1 Attach wheels to bench base.JPG
  • 6.1 Liquid nails along edge of worktop.JPG
  • 6.2 Screw backboard to back of bench.JPG
  • 7.2 Tidy away powerboard cord.JPG
  • 7.1 Stick down powerboard.JPG
  • 7.3 Varnish the worktop.JPG
  • GarageStorage.png
  • Step 1.1 Measure lengths of pine to fit base.jpg
  • Step 1.4 Measure widths.jpg
  • Step 1.2 Pencil line to match base.jpg
  • Step 1.3 Cut length with saw.jpg
  • Step 1.5 Lengths and widths to fit base.jpg
  • Step 2.2 Use drill bit for speed.jpg
  • Step 2.3 Use 2 screws for each join.jpg
  • Step 2.1 Drill before screwing together.jpg
  • Step 2.4 Repeat steps for top frame.jpg
  • Step 3.1 Measure base of sides.jpg
  • Step 3.3 Height of sides depends on trays.jpg
  • Step 3.4 Measure exact sides length.jpg
  • Step 3.2 Base of side will sit here.jpg
  • Step 3.5 Trim pine if needed.jpg
  • Step 3.6 Fit sides together like base.jpg
  • Step 4.1 Measure length of shelf struts.jpg
  • Step 4.2 See how struts will sit.jpg
  • Step 4.3 Fit struts in place.jpg
  • Step 4.4 Repeat struts on both sides.jpg
  • Step 5.2 Put frames together.jpg
Workshop Resources Our Sites
Quick Links
Go to Bunnings