Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (MitchellMc)

Images in Profile (MitchellMc)

Album Privacy: Public

Profile (MitchellMc)

  • 2.3 Measure distance between posts at middle..jpg
  • 2.4 Measure distance between posts at top.jpg
  • 2.6 Render.jpg
  • 2.5 Adjust clamps on brace so posts are parallel.jpg
  • 3.1 Take you top rail pre-drill and fix onto posts.jpg
  • 3.2 Cut your top rail to length.jpg
  • 3.4 Render.jpg
  • 3.3 Top rail in place and posts parallel.jpg
  • 4.1 Cut three pieces of timber.jpg
  • 4.3 Measure internal height of end piece.jpg
  • 4.2 End view of planter.jpg
  • 4.4 End piece in position.jpg
  • 4.5 Temporarily clamp ends of planter.jpg
  • 5.2 Countersink holes for flush fitment.jpg
  • 5.1 Pre-drill fixing holes through front and back.jpg
  • 5.3 Fixings in place.jpg
  • 6.1 Measure to find center of planter and mark.jpg
  • 6.2 Take an offcut and diagonally position it on central line.jpg
  • 6.4 Stepped back.jpg
  • 6.3 Diagonal marked.jpg
  • 6.5 Pre-drilled holes for mounting.jpg
  • 7.1 Lines matched up.jpg
  • 7.2 In postion.jpg
  • 7.3 Fixing all boxes into place.jpg
  • 7.4 Render.jpg
  • 8.1 Drill holes in base of planter for drainage.jpg
  • 8.3 Staple around perimeter.jpg
  • 8.2 Cut plastic to fit.jpg
  • 8.4 Stapled in place.jpg
  • 8.5 Trim excess to size..jpg
Workshop Resources Our Sites
Quick Links
Go to Bunnings