Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (JustJim)

Images in Profile (JustJim)

Album Privacy: Public

Profile (JustJim)

  • Face jointing jig sitting over the rip fence and with the sawblade embedded into it.
  • 20190316-_5007992-StoolParts.jpg
  • 20190316-_5007993-StoolDryFit.jpg
  • 20190318-_5007996-StoolPainted.jpg
  • 20190325-_5008015-TraysOnBench.jpg
  • The lower of these two shelves seemed ideal.
  • 20190325-_5008018-Sanded.jpg
  • 20190325-_5008020-TestFit.jpg
  • 20190330-_5008024-Painted test fit.jpg
  • 20190330-_5008028-Nailed in place.jpg
  • 20190330-_5008029-Dividers fitted.jpg
  • One a penny, two a penny, hot cross buns. Fresh out the oven.
  • 20190330-_5008033-Frnished rack.jpg
  • Detail of corner reinforcement.
  • Empty caddy showing atrocious routing attempts!
  • This space intentionally blank.
  • Propane and propane accessories. No wait…
  • Sawblade set to random angle that looked good.
  • Assembled and fixed.
  • Screwed into position.
  • Close up of hanging saw.
  • Tongue and Dado joint in plywood
  • Box frame with tongue and dado joinery
  • The long sides were cut upright against the fence.
  • The ends were cut flat on the table.
  • Long side being routed for box bottom.
  • Masonite base dry fitted.
  • I'm ready for my close up, Mr DeMille.
  • Arbor spanner in place.
  • Chipper block empty.
Workshop Resources Our Sites
Quick Links
Go to Bunnings