There are methods to improve the appearance of wider cracks where you can clean the dirt out and then fill with clear epoxy glue. You would then colo ...
If the existing grout is still solid and can't easily be scraped out, then you can overcoat it with Davco Rejuvenation grout. Existing grout must be ...
If you still have the chip, you can glue it back in position with Clear Epoxy Glue. But if the chip has gone missing, then you need to fill the damag ...
If you still have the chipped piece of the benchtop you could attempt to glue it back on. You could use an epoxy paste as a filler but if it's mixed ...
Fixing a chip in a bathtub is typically a three-step process: cleaning the bathtub, filling the hole with epoxy paste, and then repainting the bath. ...
The cracks are a phenomenon called crazing. They are typically caused by thermal stress. This is when the ceramic material is exposed repeatedly to h ...
To complete a simple temporary repair I would use Selleys 250ml Aquadhere Exterior Adhesive and apply it with a small brush inside all the cracks. Cl ...
Monitoring your water meter is a great way to check whether you still have a leak. You'll generally find the house's meter close to the street. Note ...
If a tile wobbles, it means that the adhesive behind has failed and the only thing holding it in place are the grout lines. Once the grout has been r ...
You'll need to prep the surface and repair the crack before any coating is applied. Applying a paint coating would improve the bathtub's appearance.
...