• Whole of House
  • Kitchen
  • Bathroom and Laundry
  • Living and Bedroom
  • Garage and Shed
  • Outdoor
  • Garden
  • Featured Projects
  • How To
  • Top Ideas
  • Best Advice
  • About Us
Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question
Share a project
Sign in
Join Workshop
  • Bunnings Workshop
  • >
  • Albums for Community
  • >
  • Images in Profile (EricL)
  • >
  • My Images for EricL

My Images for EricL

My Images for EricL

  • Albums
  • All images
Image Options
  • Flag Image for Review
  • Bookmark
  • Subscribe to RSS Feed

Album: Profile (EricL)

by Bunnings Team Member EricL
3.1 Position clip at center of line.png
2.3 Positions for broom holder hooks marked.png
2.1 Measure 110mm from edge.png
2.2 Mark position of broom holder clip.png
3.2 Mark mounting holes for hooks.png
3.3 Drill pilot holes for broom holder hooks.png
4.2 Mark mounting position.png
4.1 Position timber under grout line.png
4.4 Drill mounting hole.png
4.3 Mark mounting position on timber.png
4.6 Paint timber length.png
4.5 Sand surface.png
5.1 Use a 3mm drill bit.png
5.2 Position drill bit in hole.png
5.3 Mark right side mounting.png
5.4 Use 3mm masonry bit.png
6.1 Place plug in brick.png
6.2 Insert plug.png
6.3 Hammer plug in.png
6.4 Make sure plug is flat on surface of brick.png
7.3 Finished Broom Holder.jpg
6.5 Screw right hand side.png
7.1 Mount the broom holder hook.png
7.2 Broom holder mounted.png
1.1. Mark 50mm away from the bottom edge.png
1.2. Draw a horizontal line across the 50mm point.png
1.1. Mark 50mm away from the bottom edge.png
1.2. Draw a horizontal line across the 50mm point.png
DeckCleaner.jpg
PaintersTape.jpg
How to change a door knob.png
Step 1.3 Pull away door knob.png
Step 1.4 Locate the cover flange slot.png
Step 1.2 Press locking latch with paper clip.png
Step 1.1 Locate door handle release latch.png
Step 1.5 Remove cover flange.png
Step 2.1 remove screws from metal plate.png
Step 2.4 remove screws from latch.png
Step 2.3 Pull door knob out.png
Step 2.2 Remove metal plate from door.png
Step 2.5 Remove old door latch.png
Step 3.1 Purchase a new privacy door knob set.png
Step 3.4 Insert door knob into latch body.png
Step 3.2 determine direction of latch.png
Step 3.3 Insert new latch into door.png
Step 3.5 Ensure alignment of door knob and latch.png
Step 3.7 Screw in latch.png
Step 3.6 ensure assembly is level.png
Step 4.4 Tighten screw to secure cover flange.png
Step 4.3 Mount screw by hand.png
7.3 Finished Broom Holder.jpg
Previous
7.3 Finished Broom Holder.jpg
Next
Added August 2023
0 Likes
Like
Posted in: How to build a broom holder - ( August 2023 )

You must be a registered user to add a comment on this image. If you've already registered, please log in. If you haven't registered yet, please register and log in.

  • Comment
Workshop Resources
  • Contact Us
  • Rules of participation
  • Terms of use
  • Privacy
  • Workshop help
Our Sites
  • Bunnings Australia
  • Bunnings New Zealand
Quick Links
  • Register
  • Sign in
Go to Bunnings