Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question

Images in Profile (EricL)

Images in Profile (EricL)

Album Privacy: Public

Profile (EricL)

  • Step 9.7 Finished drawer out no tools.png
  • Step 9.6 Finished.png
  • Step 9.8 Finished drawer out.png
  • Step 1.2 Sand cut timber edges.png
  • Step 2.2 Corner clamp drill pilot hole.png
  • Step 2.1 Line up fisrt shelf pieces.png
  • Step 1.1 Cut timber.png
  • Step 2.3 Assemble first shelf.png
  • Step 3.1 Clamp leg use combo square top.png
  • Step 2.4 Assemble second shelf.png
  • Step 3.2 Drill pilot holes top shelf.png
  • Step 3.3 Secure with 4 screws top.png
  • Step 3.4 Leave a gap bottom 100mm.png
  • Step 3.5 Clamp leg use combo square bottom.png
  • Step 3.6 Attach right leg.png
  • Step 3.7 Front legs attached.png
  • Step 4.2 Transfer measurments to benchtop.png
  • Step 4.3 Cut benchtop with circular saw.png
  • Step 4.1 Double check shelf measurements.png
  • Step 5.1 Measure MDF panel..png
  • Step 4.4 Sand cut edge of benchtop.png
  • Step 4.6 Place benchtop on bottom and top shelf.png
  • Step 4.5 Drill kreg mounting holes.png
  • Step 5.2 Cut MDF panel..png
  • Step 5.4 Screw MDF panel to drawer frame.png
  • Step 5.3 Fit MDF panel to drawer frame.png
  • Step 6.1 Mark 300mm from bottom of top shelf.png
  • Step 6.3 Drill pilot holes drawer side.png
  • Step 7.1 Position drawer slide just under MDF panel.png
  • Step 6.2 Use clamps to position drawer side.png
Workshop Resources Our Sites
Quick Links
Go to Bunnings