• Whole of House
  • Kitchen
  • Bathroom and Laundry
  • Living and Bedroom
  • Garage and Shed
  • Outdoor
  • Garden
  • Featured Projects
  • How To
  • Top Ideas
  • Best Advice
  • About Us
Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question
Share a project
Sign in
Join Workshop
  • Bunnings Workshop
  • >
  • Albums for Community
  • >
  • Images in Profile (Adam_W)
  • >
  • My Images for Adam_W

My Images for Adam_W

My Images for Adam_W

  • Albums
  • All images
Image Options
  • Flag Image for Review
  • Bookmark
  • Subscribe to RSS Feed

Album: Profile (Adam_W)

by Adam_W
Step 7 Remove screws from mould once cured.png
Step 8.1 Roll over and remove mould base.png
Step 8.2 Carefully remove characters.png
Step 4.1 Apply a generous amount of adhesive to characters.png
Step 3 Assemble mould box.png
Step 1 Mark out cuts and character positions.png
Step 2 Fit guide to saw and cuts mould sections.png
Step 4.2 Position characters mirror image.png
Step 5 Dry mix cement blend adding oxide if using.png
Step 6 Gently work mix into all holes and corners.png
Step 7 Remove screws from mould once cured.png
Step 8.1 Roll over and remove mould base.png
Step 8.2 Carefully remove characters.png
Step 2 Fit guide to saw and cuts mould sections.png
IMG20220224145554.jpg
Hero 1.png
Hero 1.png
Step 1 Remove grass or plants and turn soil over.png
Step 1 Remove grass or plants and turn soil over.png
Hero 1.png
Step 1 Remove grass or plants and turn soil over.png
Step 2.2 Thoroughly blend in soil improver.png
Step 2.1 Add compost or manure.png
Step 3 Use soil leveller or landscape rake to shape.png
Step 4.1 Layout plants using spacer.png
Step 5.1 Deeply water each plant.png
Step 5.2 Mulch the whole bed well.png
Step 4.2 Plant and create a watering bowl.png
5.3 After planting and mulching.png
5.4 Six months after spring planting.png
IMG_2625.jpg
IMG_2624.jpg
Moved in...
Walling underway with pond...
Early stages...
Finished :)
Banner.jpg
Step 1 - Measure mark and cut all sleepers.jpg
Step 2 - Create corners from 600mm lengths.jpg
Step 3 - Position sleeper in corner align and secure.jpg
Step 4.1 Add sleeper section to long face of corner and secure.jpg
Step 4.2 Check corners with square.jpg
Step 5 Add remaining side boards.jpg
Step 6 Measure between corner posts on sides that will have seats.jpg
Step 7.1 Cut 90 x 45 for seat rails.jpg
Step 7.2 Mark 50mm in from edge of cut sleeper and position rail.jpg
Step 8 Roll over and secure with 100mm screws.jpg
Step 9.1 Measure between seat rails.jpg
Step 9.2 Attach rail to bed face.jpg
Step 10.1 Use square at 45 to mark a series of triangles.jpg
5.3 After planting and mulching.png
Previous
5.3 After planting and mulching.png
Next
Added March 2022
0 Likes
Like
Posted in: How to plant a clumping bamboo hedge - ( March 2022 )

You must be a registered user to add a comment on this image. If you've already registered, please log in. If you haven't registered yet, please register and log in.

  • Comment
Workshop Resources
  • Contact Us
  • Rules of participation
  • Terms of use
  • Privacy
  • Workshop help
Our Sites
  • Bunnings Australia
  • Bunnings New Zealand
Quick Links
  • Register
  • Sign in
Go to Bunnings