• Whole of House
  • Kitchen
  • Bathroom and Laundry
  • Living and Bedroom
  • Garage and Shed
  • Outdoor
  • Garden
  • Featured Projects
  • How To
  • Top Ideas
  • Best Advice
  • About Us
Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question
Share a project
Sign in
Join Workshop
  • Bunnings Workshop
  • >
  • Albums for Community
  • >
  • Images in Profile (Adam_W)
  • >
  • My Images for Adam_W

My Images for Adam_W

My Images for Adam_W

  • Albums
  • All images
Image Options
  • Flag Image for Review
  • Bookmark
  • Subscribe to RSS Feed

Album: Profile (Adam_W)

by Adam_W
Step 17.2 Mulch well.jpg
Step 17.1 Plant out the bed.jpg
Step 1 - Measure mark and cut all sleepers.jpg
Step 2 - Create corners from 600mm lengths.jpg
Step 3 - Position sleeper in corner align and secure.jpg
Step 4.1 Add sleeper section to long face of corner and secure.jpg
Step 4.2 Check corners with square.jpg
Step 7.1 Cut 90 x 45 for seat rails.jpg
Step 5 Add remaining side boards.jpg
Step 6 Measure between corner posts on sides that will have seats.jpg
Step 7.2 Mark 50mm in from edge of cut sleeper and position rail.jpg
Step 8 Roll over and secure with 100mm screws.jpg
Step 9.1 Measure between seat rails.jpg
Step 9.2 Attach rail to bed face.jpg
Step 10.1 Use square at 45 to mark a series of triangles.jpg
Step 10.2 Attach triangle support bracket to seat.jpg
Step 11 Position seats and screw to corner posts.jpg
Step 12 Add support rails to short sides of inside of bed.jpg
Step 13.1 Mark centre of bed between rails.jpg
Step 13.2 Fit centre support.jpg
Step 14.1 Add sleepers to rails.jpg
Step 14.2 Screw sleepers down with 75mm screws.jpg
Step 15.1 Cover base with drianage fabric.jpg
Step 15.2 Fill bed with soil and compost.jpg
Step 16 Optional step Dress seats with treated pine decking.jpg
Step 17.1 Plant out the bed.jpg
Step 17.2 Mulch well.jpg
BANNER.jpg
BANNER.jpg
Step 1 Select a location.jpg
Step 2 Position pond and mark for digging.jpg
Step 3 Excavate to pond depth.jpg
Step 4 check excavated depth and shape.jpg
Step 5 Position pond and make level.jpg
Step 6 Plant around pond edge.jpg
Step 7 Add gravel pump and light.jpg
Step 8 Mulch around plants and turn on pump.jpg
Step 1 Select a location.jpg
Step 4 check excavated depth and shape.jpg
Step 3 Excavate to pond depth.jpg
Step 2 Position pond and mark for digging.jpg
Step 5 Position pond and make level.jpg
Step 7 Add gravel pump and light.jpg
Step 6 Plant around pond edge.jpg
Step 8 Mulch around plants and turn on pump.jpg
seaside-daisy-geraldine-cote.jpg
HowToChooseScrew.jpg
A zince plate screw
A stainless steel screw
Coarse timber thread and fine metal thread screws
Step 17.2 Mulch well.jpg
Previous
Step 17.2 Mulch well.jpg
Next
Added April 2022
0 Likes
Like
Posted in: How to build a planter box with bench seats - ( April 2022 )

You must be a registered user to add a comment on this image. If you've already registered, please log in. If you haven't registered yet, please register and log in.

  • Comment
Workshop Resources
  • Contact Us
  • Rules of participation
  • Terms of use
  • Privacy
  • Workshop help
Our Sites
  • Bunnings Australia
  • Bunnings New Zealand
Quick Links
  • Register
  • Sign in
Go to Bunnings