• Whole of House
  • Kitchen
  • Bathroom and Laundry
  • Living and Bedroom
  • Garage and Shed
  • Outdoor
  • Garden
  • Featured Projects
  • How To
  • Top Ideas
  • Best Advice
  • About Us
Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question
Share a project
Sign in
Join Workshop
  • Bunnings Workshop
  • >
  • Albums for Community
  • >
  • Images in Profile (Adam_W)
  • >
  • My Images for Adam_W

My Images for Adam_W

My Images for Adam_W

  • Albums
  • All images
Image Options
  • Flag Image for Review
  • Bookmark
  • Subscribe to RSS Feed

Album: Profile (Adam_W)

by Adam_W
Step 5.1 Assemble the frame.jpg
Step 5.3 Countersink for heads of 100mm screws.jpg
Step 6 Position frame.jpg
Step 7 Position and fix off support trim.jpg
Step 8 Cut all required slats.jpg
Step 8.2 Set a jig to cut spacer blocks accurately.jpg
Step 9.1 Place a small blob of adhesive in corner.jpg
Step 9.3 Position front strip and secure.jpg
Step 9.2 Position slat on spacers and fix off.jpg
Step 10 Apply at least two coats of paint.jpg
Timber privacy screen on deck.png
Step 1 Measure top and bottom.jpg
Step 2.3 Break out cut sections with chisel.jpg
Step 2.1 Clamp cut pieces down.jpg
Step 2.2 Make multiple cuts through marked area.jpg
Step 3 Fit riser blocks.jpg
Step 5.1 Assemble the frame.jpg
Step 5.2 Drill pilot holes.jpg
Step 5.3 Countersink for heads of 100mm screws.jpg
Step 6 Position frame.jpg
Step 7 Position and fix off support trim.jpg
Step 8 Cut all required slats.jpg
Step 8.2 Set a jig to cut spacer blocks accurately.jpg
Step 9.1 Place a small blob of adhesive in corner.jpg
Step 9.2 Position slat on spacers and fix off.jpg
Step 9.3 Position front strip and secure.jpg
Step 10 Apply at least two coats of paint.jpg
Timber privacy screen on deck.png
Step 1 Measure top and bottom.jpg
Step 2.1 Clamp cut pieces down.jpg
Step 2.3 Break out cut sections with chisel.jpg
Step 2.2 Make multiple cuts through marked area.jpg
Step 3 Fit riser blocks.jpg
Step 4 Measure and cut sides and centre.jpg
Step 5.1 Assemble the frame.jpg
Step 5.2 Drill pilot holes.jpg
Step 5.3 Countersink for heads of 100mm screws.jpg
Step 7 Position and fix off support trim.jpg
Step 6 Position frame.jpg
Step 8 Cut all required slats.jpg
Step 8.2 Set a jig to cut spacer blocks accurately.jpg
Step 9.1 Place a small blob of adhesive in corner.jpg
Step 9.2 Position slat on spacers and fix off.jpg
Step 9.3 Position front strip and secure.jpg
Step 10 Apply at least two coats of paint.jpg
Timber privacy screen on deck.png
Score and snap knife and my trusty old fibro cutters
Use a score and snap knife in conjunction with a straight edge
Fibro cutters look old school but they are fast and easy to use
Wet saws are the only safe way to cut thicker materials
Step 10 Apply at least two coats of paint.jpg
Previous
Step 10 Apply at least two coats of paint.jpg
Next
Added August 2022
0 Likes
Like

You must be a registered user to add a comment on this image. If you've already registered, please log in. If you haven't registered yet, please register and log in.

  • Comment
Workshop Resources
  • Contact Us
  • Rules of participation
  • Terms of use
  • Privacy
  • Workshop help
Our Sites
  • Bunnings Australia
  • Bunnings New Zealand
Quick Links
  • Register
  • Sign in
Go to Bunnings