Hi .@JacobZ
I'm still progressing on this. I've laid out the 70 x 45 joists and most will need shims rather than the mini feet I was hoping to use. ...
Hi Nailbag
I'm still working on this project and have bought 1 x H3 70 x 45mm board to test it in position for each joist. The first position closest ...
Mmmm, the slope on the two outer edges - which cop all the weather - are quite high insofar as the concrete is concerned. It's quite dished, like a ul ...
Hi .@JacobZWater/weather ingress is on two sides, unfortunately at right angles. That's where all the rotted timber (boards and joists) were from the ...
Thanks again Jacob I'm not sure I'll be able to accommodate the 70 mm joist height at the outer edges (opposite edges from the door). .. The problem ...
Hi JacobThanks for getting back to me.I'm planning on using Ekodeck summit 180mm Width planks. (23mm H)Basic plan is pictured. I was playing with putt ...
That looks fantastic @Henry1 and looking at the support structure, I imagine it is dead sturdy.
The decision to use a breaker board was certainly wo ...
Hi .@JacobZWater/weather ingress is on two sides, unfortunately at right angles. That's where all the rotted timber (boards and joists) were from the ...
Hi JacobThanks for getting back to me.I'm planning on using Ekodeck summit 180mm Width planks. (23mm H)Basic plan is pictured. I was playing with putt ...
Hi DavePhotos just posted. I have a 100mm gap from the concrete base to the swing of the back security door. The concrete is curved so flow goes under ...
