If you've tried cleaning mould from silicon previously, the mould has likely stained it. If this is the case, no amount of scrubbing or applying cle ...
There are methods to improve the appearance of wider cracks where you can clean the dirt out and then fill with clear epoxy glue. You would then colo ...
As long as there is an existing waterproofing layer, then an additional one doesn't need to be installed before re-tiling.
You will need to check f ...
Using bleach can be a smelly process, but it is one of the best ways of killing mould and its spores. I'd suggest after a thorough cleaning for you t ...
If the existing grout is still solid and can't easily be scraped out, then you can overcoat it with Davco Rejuvenation grout. Existing grout must be ...
I used to tell my customers that nothing works except for lots of elbow grease. I went to the Bunnings Expo and these clowns were flogging 30 Second ...
Products like Drano are great if the blockage is a light build-up which can be dissolved. If the blockage is more substantial and has built up over t ...
If you still have the chip, you can glue it back in position with Clear Epoxy Glue. But if the chip has gone missing, then you need to fill the damag ...
Scale typically needs an acid to break it down. The issue you'll face is using an acid that is strong enough to break the scale down, but that also w ...