Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

How to restore a wooden armchair

Nham
Experienced Contributor

Difficulty: Beginner

Restoring a wooden armchair is a simple project that can extend the life of a comfortable chair that’s beginning to show its age.

 

It’s easy to get started and you can use the same techniques to restore or upcycle other pieces of furniture. All you need is an old piece of furniture and some time to invest in bringing it back to life. Here’s our simple step-by-step guide.

Steps

Step 1

Prepare your work area and make sure you have enough room to work in. The area must be well ventilated as the sanding will create a lot of sawdust.

 

Inspect your armchair for any damage, such as cracks or chips in the frame. Remove all seating and fittings, including the upholstery. Place all screws into a jar.

 

Some armchairs have a recliner feature. Take photos or videos for reassembling in the final step.

 

1.1 Chair to restore.png1.2 Removing upholstry.png1.3 Upholstry and cushion removed.png

Step 2

Repair any cracks. You can use wood glue, but for this repair we used all-purpose Gorilla Glue). Use a chisel to open up the crack, then add the glue straight into the crack. Clamp the area together and leave overnight to set.

 

Fill in any chips using wood putty. Simply clean the surface, apply the putty with a scraper and let it dry.

 

2.1 Crack in timber requiring repair.png2.2 Filling crack with glue.png  2.3 Clamping crack together.png2.4 Timber putty.png2.5 Filled damage.png2.6 Filled area sanded smooth.png

Step 3

Most armchairs have varnish or some form of wood stain. This can be easily removed with an orbital sander. Start sanding the arms and legs of the chair using an 80 grit sheet, then finish off with 120 grit.

 

For difficult areas such as curved legs, you will have to do some hand sanding with sanding sheets. Start with either 60 or 80 grit, cut the sanding sheets into strips and use a sawing motion on curved surfaces to remove the stain or varnish.

 

Complete the final sanding by hand with 240 grit sandpaper over the whole chair.

 

Don’t forget to wear a mask and safety glasses as there will be a lot of sawdust. Make sure you are happy with the finished surface before beginning the staining process.

 

3.1 Sanding varnish off chair.png3.2 Curved sections and corners sanded.png3.3 Varnish sanded off chair.png

Step 4

To highlight the grain and the natural colour of the wood you can use furniture oil or indoor furniture varnish. Apply the first coat with a soft cloth and wipe off any excess - this will slightly darken the wood. Let it dry overnight and reapply oil until you achieve the desired wood tone. For this restoration, we applied four coats of oil to achieve the colour we wanted.

 

4.1 Timber coated with oil.png4.2 Timber coated with oil.png4.3 Applying second coat of oil.png

Step 5

Replacing the cushion foam is easy. Remove the old foam and measure the sides using a measuring tape. Confirm your measurements by measuring upholstery such as the backrest ­because old foam can become compressed over time.

 

Order the foam to your specifications. We chose a medium-firm feel with memory foam. If you need to cut the foam, mark out the area and cut using a bread knife. For round edges, mark the curve with a marking pen and shape with your bread knife. Wash your upholstery and insert the new foam.

 

The back section of the armchair usually has a wooden support frame that goes inside the upholstery with the cushion foam. You will need to glue the foam on to the wooden frame using a spray adhesive such as Selleys Kwik Grip Spray.

 

Spray the adhesive on to the foam, firmly press the wooden frame on top of the foam, place a weight on the wooden frame and allow to set. Insert the new foam backrest back into the upholstery fabric and reattach to the wooden frame using a staple gun 

 

5.1 New and old foam.png5.2 Foam cut and ready to install.png5.3 New foam inserted in cushion.png5.4 Cutting backrest foam to size.png5.5 Marking outline on new foam.png5.8 Stapling material onto backrest.png5.9 Backrest complete.png

Step 6

Reassemble the chair and reattach any moving parts. Staple the upholstery on to the wooden sections of the chair and place the seating back into position.

 

Enjoy your newly restored chair.

 

6.1 Re-attaching moving parts.png6.2 Stapling upholstry onto wooden sections.png6.3 Finished chair.png

Materials

  • Wood filler or putty
  • Wood glue
  • Sandpaper (various grit sizes)
  • Furniture oil or varnish
  • Cushion foam (medium to firm)
  • Spray adhesive
  • Marking pen
  • Rags.

Tools

  • Cordless impact drill (for removing screws)
  • Pliers (for removing staples)
  • Orbital sander with sheets of various grit sizes
  • Chisel
  • Clamps
  • Scissors
  • Measuring tape
  • Bread knife
  • Staple gun
  • Scraper
  • Personal protective equipment – mask and eye protection for sanding.

Images

1.1 Chair to restore.png

1.2 Removing upholstry.png

1.3 Upholstry and cushion removed.png

2.1 Crack in timber requiring repair.png

2.2 Filling crack with glue.png

2.3 Clamping crack together.png

2.4 Timber putty.png

2.5 Filled damage.png

2.6 Filled area sanded smooth.png

3.1 Sanding varnish off chair.png

3.2 Curved sections and corners sanded.png

3.3 Varnish sanded off chair.png

4.1 Timber coated with oil.png

4.2 Timber coated with oil.png

4.3 Applying second coat of oil.png

5.1 New and old foam.png

5.2 Foam cut and ready to install.png

5.3 New foam inserted in cushion.png

5.4 Cutting backrest foam to size.png

5.5 Marking outline on new foam.png

5.8 Stapling material onto backrest.png

5.9 Backrest complete.png

6.1 Re-attaching moving parts.png

6.2 Stapling upholstry onto wooden sections.png

6.3 Finished chair.png

2 Replies
Jason
Community Manager
Community Manager

Beautiful chair and a great result @Nham. It's wonderful to give an old piece of furniture a second life. Thanks so much for sharing these easy-to-follow instructions. I'm sure they are going to help and inspire plenty of Bunnings Workshop community members. 

 

Jason

 

MitchellMc
Bunnings Team Member
Bunnings Team Member

Love it @Nham! What a ripper of an article, and I can't believe how well the chair came out. The finish you've used looks terrific, and it really lets the timber speak for itself.

 

Many thanks for sharing, and I look forward to seeing what your next project will be.

 

Mitchell

 

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects