• Whole of House
  • Kitchen
  • Bathroom and Laundry
  • Living and Bedroom
  • Garage and Shed
  • Outdoor
  • Garden
  • Featured Projects
  • How To
  • Top Ideas
  • Best Advice
  • About Us
Workshop
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Ask a question
Share a project
Sign in
Join Workshop
  • Bunnings Workshop
  • >
  • Albums for Community
  • >
  • Images in Profile (Adam_W)
  • >
  • My Images for Adam_W

My Images for Adam_W

My Images for Adam_W

  • Albums
  • All images
Image Options
  • Flag Image for Review
  • Bookmark
  • Subscribe to RSS Feed

Album: Profile (Adam_W)

by Adam_W
Step 14.1 Add sleepers to rails.jpg
Step 14.2 Screw sleepers down with 75mm screws.jpg
Step 15.1 Cover base with drianage fabric.jpg
Step 15.2 Fill bed with soil and compost.jpg
Step 16 Optional step Dress seats with treated pine decking.jpg
Step 17.1 Plant out the bed.jpg
Step 17.2 Mulch well.jpg
BANNER.jpg
BANNER.jpg
Step 1 Select a location.jpg
Step 2 Position pond and mark for digging.jpg
Step 3 Excavate to pond depth.jpg
Step 4 check excavated depth and shape.jpg
Step 5 Position pond and make level.jpg
Step 6 Plant around pond edge.jpg
Step 7 Add gravel pump and light.jpg
Step 8 Mulch around plants and turn on pump.jpg
Step 1 Select a location.jpg
Step 4 check excavated depth and shape.jpg
Step 3 Excavate to pond depth.jpg
Step 2 Position pond and mark for digging.jpg
Step 5 Position pond and make level.jpg
Step 7 Add gravel pump and light.jpg
Step 6 Plant around pond edge.jpg
Step 8 Mulch around plants and turn on pump.jpg
seaside-daisy-geraldine-cote.jpg
HowToChooseScrew.jpg
A zince plate screw
A stainless steel screw
Coarse timber thread and fine metal thread screws
A plain countersunk head screw
A hex head screw
A Phillips head screw
A square drive screw
A needle point screw
A self-tapping screw
Adjust the clutch on your drill-driver
Light disc.jpg
Step 1.3 find the cut point.jpg
Step 1.2 measure light strip.jpg
Step 1.1 sand off sharp edges.jpg
Step 2.1 Position and mark for control unit.jpg
Step 2.3 check size is correct.jpg
Step 2.2 drill clearance holes in corners.jpg
Step 3.3 apply adhesive and firmly position.jpg
Step 3.4 Screw down.jpg
Step 3.1 measure and mark for centre of the front disc.jpg
Step 3.2 use radius marker to mark for rear disc.jpg
Step 4.2 Seal or paint front of disc.jpg
Step 4.1 Seal rear of discs.jpg
Step 6 Plant around pond edge.jpg
Previous
Step 6 Plant around pond edge.jpg
Next
Added May 2022
0 Likes
Like
Posted in: How to install a garden pond - ( May 2022 )

You must be a registered user to add a comment on this image. If you've already registered, please log in. If you haven't registered yet, please register and log in.

  • Comment
Workshop Resources
  • Contact Us
  • Rules of participation
  • Terms of use
  • Privacy
  • Workshop help
Our Sites
  • Bunnings Australia
  • Bunnings New Zealand
Quick Links
  • Register
  • Sign in
Go to Bunnings