Had my rangehood fitted. How do i fill the gap between the rangehood and ceiling? I cant put a small timber piece and there is the cornice. any ideas? ...
Thanks !checked the door hinges , they seemed tight.I removed the plate and the latch didn’t still fall into the recess. Drew pencil guides and had to ...
This door doesn’t close and latch properly. Can’t hear the usual click and often the door opens. Do I replace the whole latch or is there a structural ...
Thanks @EricL I haven’t ordered the splash back yet. There is still a risk then as you say.From your description, will paint the wall first, then get ...
@MitchellMc I can’t bring the left one forward, as it is attached to the railing on the back wall. Will look at the vinyl tiles and see if I can cut t ...
@MitchellMc Slowly getting up the cabinetry. Seeing few issues but good learning challenges.Next immediate challenge is to figure out how to fill the ...
@MitchellMc Did exactly what you suggested. I managed to remove that timber and make it as flat as possible. See pics after. Many thanks for the sugg ...
Thanks !checked the door hinges , they seemed tight.I removed the plate and the latch didn’t still fall into the recess. Drew pencil guides and had to ...
This door doesn’t close and latch properly. Can’t hear the usual click and often the door opens. Do I replace the whole latch or is there a structural ...
@MitchellMc I can’t bring the left one forward, as it is attached to the railing on the back wall. Will look at the vinyl tiles and see if I can cut t ...
@MitchellMc Did exactly what you suggested. I managed to remove that timber and make it as flat as possible. See pics after. Many thanks for the sugg ...
Started my kitchen renovation, removed existing cabinets , found a section of the ceiling with some exposure to the roof . I want to patch this ( ceil ...
See attached pics of my shed. Would like to put the peg board between the racks. Havent really thought about a design for a frame but was thinking abo ...