Hello @EricL ,
I'll keep the current door handle as it is and I'll add the deadbolt above it, so I'll have to buy a new rebate.
So, what would be the ...
Hello @JacobZ ,Thank you for your tips. Originally, I was trying to find a smart lock with handle to replace the Gainsborough but I couldn't find anyt ...
Thank you, @Nailbag . I'll do it this weekend.Now, I thought that the instalation of the deadbolt would be more strightforward in my front door, but I ...
Thank you, @Nailbag!I'll install the strike plate and get a smaller hole saw as you suggested.So, to sum up what I need to buy is:Centre Punch14 mm bi ...
Thank you Eric, Nailbag and Dave for the tips. @Nailbag Quick questions: I'm adding a picure of the Strike below. It comes with 2 parts - internal an ...
Hello guys, I'm new at DIY and I'm installing a deadbolt to the door from my garage. I used the Ryobi wood and metal door lock installation kit and th ...
Hello @pauloguanaes
I agree with your first and second steps, mark the bore hole where the latch hole will be drilled. Once the bore hole and latch ...
Hi @pauloguanaes
That rebate kit @JacobZ has linked in is perfect. In fact I'm glad its been mentioned as I didn't even know they were available an ...
Hi @pauloguanaes,
The metal enclosure is called a rebate kit, like this Gainsborough Rebate Kit. There is a variety available for different locks an ...
Hi @pauloguanaes
All good on the list though hold off on the chisel as you might not need it. And if you did need to knock away anything it might j ...
Hello @pauloguanaes
Let me tag @Nailbag as well to make them aware of your questions. I believe it should be ok not to use the striker plate as the ...
Good Morning @pauloguanaes
I really cant add more to the instructions then @EricL and @Nailbag 's ones They are the same steps I would take. Only th ...
Hello @pauloguanaes
Welcome to the Bunnings Workshop community. It's sensational to have you join us and thanks for sharing your question about you ...
Hello @EricL ,
I'll keep the current door handle as it is and I'll add the deadbolt above it, so I'll have to buy a new rebate.
So, what would be the ...
Thank you, @Nailbag!I'll install the strike plate and get a smaller hole saw as you suggested.So, to sum up what I need to buy is:Centre Punch14 mm bi ...
Hello guys, I'm new at DIY and I'm installing a deadbolt to the door from my garage. I used the Ryobi wood and metal door lock installation kit and th ...
