Ok so i managed to find one stud in the ceiling for each section of the partition wall. Was hoping to find more but it will have to do. Will chuck in ...
I'm looking to install some outdoor blinds on the window on my west facing balcony. I've done some research and the Coolaroo Crank Operated Outdoor Bl ...
Thanks for the advice. I've measured from the ceiling to the top of the half wall in several spots and it seems to be mostly pretty level. One section ...
Thanks for the advise and suggestions. I'm not really concerned about someone falling through it as the half wall is high enough to prevent anyone goi ...
Hi team. I'm looking to build a partition wall similar to the below above my staircase and looking for advise. Its an L shaped shaircase with a 1/2 he ...
Hi @atrodd,
If the framing is timber, they would be fine, but if it is steel, they wouldn't be because the thread is far too open. With steel framin ...
Afternoon @atrodd
First up I would measure multiple points from the half high wall to the ceiling as ceilins are not always straight.
Then I would co ...
Hi @atrodd,
Like @Dave-1 mentioned, you can't always trust that the ceiling will be perfectly flat, so I'd be marking the ceiling where the top plat ...
Hello @atrodd
Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about building ...
Hi @atrodd,
Although the partitions are not loadbearing they need to withstand the forces of an adult person stumbling/tripping or even loosing thei ...
Thanks for the advice. I've measured from the ceiling to the top of the half wall in several spots and it seems to be mostly pretty level. One section ...
Thanks for the advise and suggestions. I'm not really concerned about someone falling through it as the half wall is high enough to prevent anyone goi ...
Hi team. I'm looking to build a partition wall similar to the below above my staircase and looking for advise. Its an L shaped shaircase with a 1/2 he ...
