ANZAC tribute

[Madmoggy]

This year I felt that I needed to go to more effort for ANZAC day.

So I’ve enlarged an image I found and using some 12 mm non structural ply 1/4 sheet (1200*60) from Bunnings I drew him out using some old carbon paper I had. ( I should have used treated ply to weather longer but he’s not going to be permanently outside I’ll just pop him out a couple of weeks before maybe more) 

then with my trusty Ryobi jigsaw I freed him from the board. He’s getting a good coat of British Paints 4in1 water based primer sealer undercoat and when dry will get two coats of satin black Splashes enamel (comes in handy tiny tins so I don’t end up with lots hanging around.

will post a picture when he’s finally painted black. I’m planning on screwing a planter stick on the black and have him standing in the garden on duty. 

while doing this I have been thinking of back lighting him with solar leds a great idea my cousin had. To reward her I cut a soldier for her 💜 He triggers fond memories of my late Dad and Mum and a Pop (WW1) I never got to meet

3 ft high approxReady for undercoat, notice my tale on the can to pour paint out without spilling it all over can.First side done time for a coffee

[EricL]

Hi @Madmoggy

What an awesome idea for ANZAC day. You can have him stand guard a few weeks leading up to the day itself. I'm sure any visitors you have will give it a second look. The LED light is a great idea and allows him to be seen even at night.

Again, thank you for sharing your ANZAC tribute project.

Eric

[Madmoggy]

[EricL]

Thank you for sharing the finished product @Madmoggy. The poppy completes the look. It will be perfect for Anzac day.

Eric