- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
What type of gate spring to use on round posts?
I want to put gate springs on two gates to keep in our new dog. The posts are wood but the gate frame is cylindrical pipe
about 25mm diameter.
Most springs have two flat ends wth screw holes - no problem with the wooden posts, but what do I do with the other end?
Are suitable springs available?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Highlight
- Report Inappropriate Content
Re: Gate spring
Hi @Hendo,
I'm not aware of any spring gate closers for the tubular pipe. However, I'd envisage that standard gate springs would work in a similar fashion. You don't have a flat surface to screw into, but that shouldn't prevent you from Tek-screwing the mount to your tubular post. The Tek-screw should be strong enough, but you could place a bolt right through the tube for extra strength.
My logic might be flawed, but the return strength of the spring is governed by it being pulled out of alignment. I suspect a similar effect will happen whether the surface is circular or flat. The effectiveness of my proposed use would likely be determined by the type of hinge on the gate. Are they standard hinges that have been welded to the gate (like on an internal door), or are they specific pipe clamp hinges?
Let me mention @TedBear to get his thoughts.
Please let me know if you have any questions.
Mitchell

Why join the Bunnings Workshop community?
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
Subject | Author | Posted | |
---|---|---|---|
April 2024 | |||
October | |||
July 2021 | |||
July 2024 | |||
July 2022 |