installing a pump and fountain in a pond

[JacobZ]

Hi @auroracrystals,

Welcome to the Bunnings Workshop community, it is fantastic to have you with us.

We have this handy guide on our website on How To Install a Pond Pump, which should answer many of your questions about installing a pond pump.

There is also this article from @Adam_W on How to install a garden pond, which provides some great information.

If you had specific questions about the process, could you please let us know some details so we can assist?

Jacob

[auroracrystals]

Thanks Jacob

We have just moved to a new house which has a waterfall and pump that does not work. we are trying to find actually what we need to have the water fall working plus the water fall in the main pond working - many thanks for help,  Brian

[JacobZ · Accepted solution]

Hi Brian (@auroracrystals),

How big a waterfall and pond are we talking about here?

The two main things that are important are matching the pump to the volume of the pond and the height the water needs to be raised.

If you can provide some details about the rough size of the pond, the height the water needs to be raised from the pond to the top of the waterfall and maybe some photos, I could certainly assist you with selecting the right products.

Each pump is going to be slightly different in terms of its installation, but once we know what we can use, I can certainly give you some guidance on how to install it.

Jacob

[auroracrystals]

Hi Jacob

That's great thank you

How do I send a photo

Brian

[auroracrystals]

Hi Jacob

I see the icon at the bottom to upload image

From the bottom to t

the top pond is around 1 metre from the bottom

Brian

[JacobZ]

Hi Brian (@auroracrystals),

In terms of volume, it doesn't look too large, so the main thing is the height.

If there is already a pump, it would be a simple case of filling the water feature to a level that allows the water to cascade down between the pools, then placing the pump in the lowest pool and attaching a hose that brings it back to the highest pool. You have an outdoor electrical point in place, so you would just need to plug the pump in.

If the pump is not working, then this AQUAPRO AP1050 Water Feature Pump would be a suitable alternative. You would just need to grab some AQUAPRO 12mm x 3m Anti-Kink Tubing and route it up to the top pool, then plug the pump in.

I hope this helps.

Please let me know if you have further questions.

Jacob