Workshop
Start a discussion
since February 2020
July
Jimi
Established Contributor
  • My latest posts
  • Posts I liked
  • My liked posts

User's latest posts

Jimi
Established Contributor
3 replies
July

Jimi
Established Contributor
4 replies

This one was fun to knock down - finally completed the last room in my house which has been empty for the last 4 years. Quite straight forward to bu ...

Jimi
Established Contributor
June

Hi @Hanna21, Thanks! I found where the studs were, and the used I think 14g 75mm screws. I used 4 screws per module. With the floating shelves I ent ...

Jimi
Established Contributor
December

Hi Mitchell,Yes I built this in the same was as my main shed DIY steel shed, Steel frame dynabolted to the ground and also the side brick wall. Ensure ...

Jimi
Established Contributor
2 replies

  Trying to make the best use of a dead spot, I created a shed to house all the bikes and kids outdoor toys. It saves them from going in the garage ...

Jimi
Established Contributor
November

Yeah that's a great idea mate, never thought of that!

Jimi
Established Contributor
October

Thanks @MitchellMc , the desk is 33mm thick Polytech Tasmanian Oak Woodmatt Laminate.

Posts user liked

Prof
Super Contributor
July

Fantastic job Jimi...Anyone would think that was a real chimney!

shauny
Budding Contributor
1 reply
July

That's come up a treat mate, looks really good.

raymao268
Junior Contributor
4 replies
November 2017

Decking is almost completed, final clean up and decking oil to be done. The kitchen is fully installed and connected. Getting ready for Christmas, Yah ...

Bunnings Team Member MitchellMc
Bunnings Team Member
November

Welcome to the Bunnings Workshop community @Fletch1967. It's terrific to have you join us and many thanks for contributing to the discussion. That ...

Fletch1967
Budding Browser
2 replies
November

Hi Jimi, I use 3 mm ply sheeting it’s about $30 for a 2400. X 1240 sheet. If you cut the sheets up into 100 mm strips along the long edge you end up w ...

Ari
Established Contributor
September

@Jimi Just a late comment to say I LOVE those open timber shelves. The thickness is very stylish. Ari

Bunnings Team Member MitchellMc
Bunnings Team Member
September 2020

Hi @Jimi, If you contact our D.I.Y. Hotline on 1800 560 771 they can create an order for the products listed as "This product is not available to ...

User's liked posts

Jimi
Established Contributor
3 replies
July

Jimi
Established Contributor
4 replies

This one was fun to knock down - finally completed the last room in my house which has been empty for the last 4 years. Quite straight forward to bu ...

Jimi
Established Contributor
June

Hi @Hanna21, Thanks! I found where the studs were, and the used I think 14g 75mm screws. I used 4 screws per module. With the floating shelves I ent ...

Jimi
Established Contributor
December

Hi Mitchell,Yes I built this in the same was as my main shed DIY steel shed, Steel frame dynabolted to the ground and also the side brick wall. Ensure ...

Jimi
Established Contributor
2 replies

  Trying to make the best use of a dead spot, I created a shed to house all the bikes and kids outdoor toys. It saves them from going in the garage ...

Jimi
Established Contributor
November

Yeah that's a great idea mate, never thought of that!

Jimi
Established Contributor
October

Thanks @MitchellMc , the desk is 33mm thick Polytech Tasmanian Oak Woodmatt Laminate.

Contact Me
Online Status
Offline
Date Last Visited
July