Workshop
Start a discussion
since March 2020
Online
Chaks_DIY
Super Contributor
  • My latest posts
  • Posts I liked
  • My liked posts

User's latest posts

Chaks_DIY
Super Contributor
1 reply
6 hours ago

Here's is a tip too @tremas I chose to create a recess by offsetting the horizontal timber from the very bottom of the cabinets. This was to run some ...

Chaks_DIY
Super Contributor
8 hours ago

If you are referiing to the open shelves, Yes I did make them myself. I used the in-built melamine panels (I'm a big fan of these) which are pretty e ...

Chaks_DIY
Super Contributor
10 hours ago

Thanks @MitchellMc I have definitely developed a liking for the ease to cut and versatility of the panels. The finish on the panels itself is pretty n ...

Chaks_DIY
Super Contributor
2 replies
yesterday

Hi @tremas I had a similar issue and solution when I did my laundry. I ended up running 2 X (top and bottom at a slightly span than the height of the ...

Chaks_DIY
Super Contributor
2 replies

Call it 'nesting' or just loving another DIY project but this one meant a lot to me... And the Mrs is pretty thilled too!   With limited space I reall ...

Chaks_DIY
Super Contributor
2 weeks ago

@diyfun Thanks for that ! I used strips of hardwood moulding for mine. Easy to cut and paint too as I'm sure you found too. Here is a photo of when we ...

Chaks_DIY
Super Contributor
2 weeks ago

Simply amazing!

Chaks_DIY
Super Contributor
2 weeks ago

Hi @TrickyBarter Thank you for the kind feedback. We used the white knight tile and laminate range which worked fantastically. I'd personally recommen ...

Posts user liked

Bunnings Team Member MitchellMc
Bunnings Team Member
8 hours ago

Hi @Paul5, White knight recommends in their where to use section avoiding painting areas exposed to a naked flame. A good rule of thumb is if you ...

Bunnings Team Member MitchellMc
Bunnings Team Member
1 reply
yesterday

That not only looks extremely practical @Chaks_DIY but is very aesthetically pleasing. You've been doing some very high calibre projects with the inBu ...

tremas
Junior Contributor
11 replies

Hello! I am about half way through a laundry renovation and would be interested in some tips. Have just had the dyer installed which leaves room for a ...

NikkiMaree
New Contributor
7 replies

I absolutely hated the timber look laminate and green tiled splash back in our house. so using a few cans of the white knight renew, the hardwood u ...

MarcL
Junior Contributor
7 replies

I made this Pinball machine just need to varnish to finish. Designed myself as I went. Various Ply, mdf and pine, coat hangers, springs and trunking/c ...

TrickyBarter
Newbie
1 reply
2 weeks ago

WOW, that looks amazing!!!! I'm considering painting my kitchen as the white cabinets have yellowed. did you do this with the reno range? did you f ...

Bunnings Team Member MitchellMc
Bunnings Team Member
2 weeks ago

Welcome to the Bunnings Workshop community @TrickyBarter. It's fabulous that you've joined us, and many thanks for jumping into the conversation. ...

User's liked posts

Chaks_DIY
Super Contributor
1 reply
6 hours ago

Here's is a tip too @tremas I chose to create a recess by offsetting the horizontal timber from the very bottom of the cabinets. This was to run some ...

Chaks_DIY
Super Contributor
8 hours ago

If you are referiing to the open shelves, Yes I did make them myself. I used the in-built melamine panels (I'm a big fan of these) which are pretty e ...

Chaks_DIY
Super Contributor
10 hours ago

Thanks @MitchellMc I have definitely developed a liking for the ease to cut and versatility of the panels. The finish on the panels itself is pretty n ...

Chaks_DIY
Super Contributor
2 replies
yesterday

Hi @tremas I had a similar issue and solution when I did my laundry. I ended up running 2 X (top and bottom at a slightly span than the height of the ...

Chaks_DIY
Super Contributor
2 replies

Call it 'nesting' or just loving another DIY project but this one meant a lot to me... And the Mrs is pretty thilled too!   With limited space I reall ...

Chaks_DIY
Super Contributor
2 weeks ago

@diyfun Thanks for that ! I used strips of hardwood moulding for mine. Easy to cut and paint too as I'm sure you found too. Here is a photo of when we ...

Chaks_DIY
Super Contributor
2 weeks ago

Simply amazing!

Chaks_DIY
Super Contributor
2 weeks ago

Hi @TrickyBarter Thank you for the kind feedback. We used the white knight tile and laminate range which worked fantastically. I'd personally recommen ...

Contact Me
Online Status
Online
Date Last Visited
4 minutes ago