Hi @Noyade
I like your idea to rebate and put beading around the frame.
You could also make the door frame , the rebate the inside of the door, then ...
Thank you @EricL
I start with a square base, then just marked the lines from corner to corner,
I bought the glass dome from Harris Scarf.
Hopefully ...
Hi @Noyade
Thank you Graeme and @mich1972 for your comments re laundry cabinet.
To answer your enquiries
Q. The glass, where purchased ?
A. I purcha ...
Following on from My Simple D-I-Y Desk, I now needed a chest of drawers to go with it, for storage of stuff. For this, I started from the inside ou ...
Hi Noyade, yes that angle's not so beautiful! But it was tricky with the clamps as you say. I ended up doing the legs one by one, which has left one ...
Hi all.
I recently finished a bookshelf project for my daughter. It's a Montessori themed bookshelf I made using plywood. Here's all the progress and ...
both Brad and I have suggested the timbermate method before applying the filler to the affected area, try it out on the underside of the table allowin ...
Hi olemateIn the past i found using the sanding dust and glue leaves a stain regardless of the glue used. I have found the best is using timbermate th ...
Thank you @EricL
I start with a square base, then just marked the lines from corner to corner,
I bought the glass dome from Harris Scarf.
Hopefully ...
@EricL thankyou, good to know for when I need to get some more glue. (please note this an internal use glue)
@EricL Just to add to this post, I rememb ...
Hello @olemate
Welcome to the Bunnings Workshop community. It's wonderful to have you join us, and thank you for sharing your question about how to ...