Thank you everyone for your great suggestions. I'll mull it over and speak with an electrician firstly. I want to do it right, and safely. No value in ...
Thanks Jewelleryrescue for the lead for EPE insulation rolls. It looks like it would be easier to install than stiffer foils boards. When you say use ...
Mitchell, just one more question- will this CSR Solar XVent just sit on the corrugated roof, or are you suggesting it go onto the northern end wall?Th ...
Please see some photos of the shed, inside and out.5cm wall gap from top of wall to roof. Wall is between sections of the shed? enough air in from cor ...
Hi @Ritar,As long as you have a registered Electrician run the cabling for your fan, I can't see an issue with it.If you wanted to go the whole hog, y ...
The CSR solar vent would need to go on the roof, though I presumed you might be thinking of going with a powered unit on the wall, given your illustra ...
Hi @Jewelleryrescue,
The reasoning behind the change in the Electricity Regulations 1995 mandating RCD's for Domestic Installations came about because ...
Hi @Ritar,
Installing a solar fan would undoubtedly assist with heat build-up in the shed, and I'd recommend a premium version like the Bradford CSR ...
Thank you everyone for your great suggestions. I'll mull it over and speak with an electrician firstly. I want to do it right, and safely. No value in ...
I want to cool my shed in summer and reduce condensation under the corrugated colour bond roof. Shed made out of weathertex. Not insulated at all.
My ...
Thank you for the information Mitchell. Summer is approaching so I had better get started with this and sort something out. I'll check out the article ...