Rookie renovater here. I want to makeover our bathroom. We are currently painting the walls but want to paint the tiles and also ideally replace the shower screen and refresh the vanity.
What are my options for doing this cheaply and quickly? I don’t want to replace the vanity but is it possible to replace the countertop without affecting the tiles?
Same question for the shower, Can the shower screen be replaced without affecting the tiles?
Welcome to the Bunnings Workshop community. Thank you so much for joining us and sharing your question about your D.I.Y. bathroom makeover.
Painting bathroom tiles is one of the most affordable ways to refresh your bathroom. I recommend using the Dulux Renovation Range not only can you paint your tiles, but this will also allow you to paint your vanity doors. Looking at your vanity photo, it seems like it is a laminated top. If it is you can use the Dulux Renovation Range to paint your vanity top as well.
Removing your shower assembly and vanity top without damaging the tiles is difficult. Looking at your shower frame, it has been custom-built to fit over the bath assembly. Having another set built in a different colour may cost you a bit. I suggest painting the shower frame to your preferred colour instead. This will save you time and money on your renovation. It sounds like a fantastic project, any updates you can provide while renovating your bathroom would be much appreciated.
Here are some handy step-by-step guides:
Here is a link for ideas and inspiration: Top 10 most popular bathroom projects
If you need more advice or information, please let us know.
This is an exciting project and will be transformed with a bit of paint.
Your vanity set up looks very similar to one I saw on social media.
A lady used thin wooden slats to create a coastal vibe. Looked pretty simple to do with just glue!
here are some photos:
Thank you so much for all your advice. I love the look of that vanity @craftyhopper thank You for sharing! Do you know the handle of the person on Instagram or what kind of wood they used to make the strips?
Thanks @EricL this is super helpful! I’ve been looking at the Dulux range so will give it a go! Thank you!
They used old Ceder blinds slats and ripped them down to size.
I’d look at staining 3mm marine ply as the chances of having left over blinds is slim.
The Insta page is house_of_hollingsworth and she has saved the project in stories.
To add to @craftyhopper's fantastic suggestion, you could achieve this look using Porta 20 x 8mm 2.4m Tasmanian Oak Square Edge Coverstrap Moulding, and the team in-store could cut it to size for you. That would save you have to cut the strips up yourself.
I'll be looking forward to following along as this is going to be a fantastic transformation.