Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Bathroom and Laundry

Help for bathroom and laundry renovation projects
aahol1
Just Starting Out
1 reply

Hi, I am looking at doing something similar to the below image. I’m looking at having the front loader wash and dryer side-by-side. I’ll have Kaboodle ...

Bunnovices
Just Starting Out
1 reply

Hi Fellow Bunnings member Newbie here to forum I'm in the process of contacting tradesman to help me repair my entire laundry as the subfloor has wate ...

seri
Just Starting Out
3 replies

Batheoom renovation, rearrange shower and remove the bathtub. Do I need to close off or how do I fill up hollowed holes from the old bathtub and the s ...

Rahi
Just Starting Out
4 replies

I have standard project home bathroom mirrors that I would like to add a wooden frame to. Unfortunately, I couldn't find affordable corner clamps at B ...

MrsSwaino
Just Starting Out
1 reply

    Planning our laundry, can the door go on the blind corner base cabinet as shown in the pic from the designer? If so, how? (As in, where do the h ...

TheDave
Finding My Feet
6 replies

Hi there, I have a tiled laundry in a fairly new build and, unfortunately, the laundry is in the middle of the house so no direct access to outside. T ...

JohnA-007
Getting Established
9 replies

I will be laying ceramic tile underlay on top of leveller compound. Any suggestion and advice will be greatly appreciated. Thank you. PS: upstairs bat ...

alex_89
Just Starting Out
4 replies

Hello. We plan on installing an inset bath (pressed steel) in the back of this bathroom (where there is no floor / joists). The plumber has roughed-in ...

sud
Just Starting Out
1 reply

hi, I am converting an existing bedroom into ensuite. Ensuite is going to be tiled from floor to ceiling. I intend to replace existing ceiling's plast ...

tom138
Having an Impact
11 replies

Hi there, I just got new floor laid in the bathroom (James Hardie Secura on timber frame) and just wondering if I can get some advise whether these ga ...

Havinacrack
Finding My Feet
1 reply

When installing Siniat Furring Channel clips to Brick/render, what screws should i use? Keeping in mind they will be holding villaboard & on some wa ...

MichaelaG
Finding My Feet
9 replies

Hi everyone, This is my first post. I am about to start a bathroom renovation where I am striping out everything except the ceiling and bathtub. The ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects