Best Advice

There is a common confusion about how to remove the blade on a mitre saw as most are actually reversely threaded. So the arbor nut / bolt will tig ...

The cracks are a phenomenon called crazing. They are typically caused by thermal stress. This is when the ceramic material is exposed repeatedly to h ...

When drilling with a masonry bit, you should be making slow progress even if the drill is not in hammer mode. You should be able to drill into it wi ...

Fixing a chip in a bathtub is typically a three-step process: cleaning the bathtub, filling the hole with epoxy paste, and then repainting the bath. ...

To avoid damaging your wall, we need to look at the shelf and find out if it is nailed or screwed in. There is also the possibility that it is glued ...

We have this problem at work every time the painters come through. Do not be tempted to hit the frame with a hammer as this will crack the glass (per ...

I recommend getting some timber cutoffs and trimming some filler pieces for the holes. I propose using Gorilla 59ml Glue Bottle to glue the filler pi ...

DynaBolt sleeves can be notoriously hard to remove. I'd suggest trying to drill out the bolt to begin with. Choose a cobalt drill bit a millimetre ...

I recommend drilling stay channels in the shelf to prevent them from moving forwards or backward. You'll need a drill, drill bit and a craft knife ...

One technique to remove a screw with a damaged head is to place a rubber band on top of the screw and place your drill on top of the rubber band and ...

If you still have the chipped piece of the benchtop you could attempt to glue it back on. You could use an epoxy paste as a filler but if it's mixed ...

if you are after a patch job, I suggest using Ideal DIY Floors 30.5 x 30.5cm x 1.1mm Winton Self Stick Black And White Vinyl Tile in combination wit ...