Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

Low-level deck with steps and lighting

asifkhawaja
Budding Contributor
asifkhawaja
asifkhawaja
Budding Contributor

This low-profile deck was built over alfresco tiles to expand the sitting area in the backyard.

 

 

deck.png

 

The project

 

I turned my boring backyard into an amazing sitting area using Ekodeck decking.

 

IMG_1048.jpg

 

I used treated Pine 140 x 45mm for the frame and Pryda joist hanger suits 45 x 140mm to support them.

 

IMG_0260.jpg

 

I placed sheeting under the deck to prevent weed growth.

 

IMG_0448.jpg

 

For the tiled alfresco area, I used treated Pine 70 x 35mm for the framing and fixed the timber to my alfresco tiles with plugs and screws. I had to pre-drill holes in the tiles for the plugs and screws.

 

IMG_0626.jpg

 

IMG_0830.jpg

 

IMG_0901.jpg

 

IMG_0903.jpg

 

IMG_0974.jpg

 

Overall it cost me roughly $6,500, and more than half of this cost was for the Ekodeck boards.

 

IMG_0978.jpg

 

Before and after

 

Before.png

 

After.png

 

More inspiration for your deck

 

Whether you are building a new deck or rejuvenating an existing one, get inspired by the clever and creative Bunnings Workshop community in our Top 10 most popular deck projects and Inspiring low-level deck builds.

 

Comments
Reego
New Contributor

Hi @asifkhawaja,

 

I have been inspired by your low level deck using Ekodeck, it looks like it has made a huge difference to your entertaining area. I have recently installed Ekodeck at the front of my house and very pleased with the outcome. My wife and I are in the planning stages of building a low level deck on our alfresco stepping down approx 200mm to an extended low level deck from the house. I was wondering if you have a gap between your joists and the tiles on your alfresco floor and if so what did you use to lift the joists off the tiles?  

Dave

EricL
Bunnings Team Member
Bunnings Team Member

Hello @Reego

 

It's great that this project has inspired you to build your own deck. Let me tag @asifkhawaja so that they are made aware of your question. Looking at the construction photos I don't see any fixings placed in yet. Any updates you can provide when you begin your deck project would be much appreciated. Our members would be more than happy to provide you with advice or information should you need it.

 

Here is a link for ideas and inspiration: Inspiring low-level deck builds

 

If you need further assistance, please let us know.

 

Eric

 

SLFDesigns
New Contributor

Hi @asifkhawaja!

 

Your deck looks so good!  I'm brand new to this community as we are looking to have a go at a low level deck around our gorgeous mango tree to make it a functional area.   Just wondering how long did it take you to complete your deck from start to finish?  And do you consider yourself an experienced DIYer?  Just trying to gauge how realistic this project would be for us to attempt.

 

Well done again - it looks amazing! 

StevieB
Projects Editor
Projects Editor

Welcome to the Bunnings Workshop community @SLFDesigns. It's fantastic to have you join us and you're in the right place. Plenty of community members have been able to tackle a deck project with little D.I.Y. experience beforehand.

 

Here are a few great places to start:

 

 

 

 

Look forward to hearing @asifkhawaja's reply. Let me also tag @MitchellMc who can help you plan out this project when he's back on the site tomorrow and over the weekend.

 

Stevie

 

asifkhawaja
Budding Contributor

@Reego thanks so much. There is no gap between the joists and the tiles. I fixed the joists directly on the tiles with screws/plugs (example here). I had to pre-drill holes in the tiles for the screws and plugs. I did keep some gaps in the framing though to allow any rain water to drain out just in case.

 

@SLFDesigns thank you so much. I am not an experienced DIYer and had never done any similar projects before. I worked only a few days a week on this so it took me almost two months or maybe more. If I can do it, anyone can do it. 👍

MitchellMc
Bunnings Team Member
Bunnings Team Member

Hi @SLFDesigns,

 

We'll all be keen to assist with your project and any questions you might have along the way. Feel free to start your own discussion post to document your progress.

 

Mitchell

 

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects