Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

How to build a pallet timber table

Peggers
Becoming a Leader

Difficulty: Intermediate

This homemade pallet table looks wonderfully rustic and authentic. It’s cheap, quick and easy to make.

 

It will also give you the confidence to build more pallet timber furniture.

Steps

Step 1

Your first task is to find suitable pallets. The table is built from three pallets. You need two pallets that look very similar to each other and are virtually the same size to form the bulk of the table top. The third pallet is going to be broken apart for the wood. If the third pallet is the same as the first two (in terms of colour and size) then you’ll get a uniform table. If you’re looking to do a really thorough job and end up with something good enough for inside dining, then that should be your preference. But if you’re looking for something fun and rustic for outside, then it’s okay if the third pallet is radically different. You will just end up with a random wood pattern. 

 

Step 1 - Find suitable pallets.JPG

Step 2

The hardest part of the whole project is taking the pallets apart without breaking the wood and losing your cool! There are specific tools you can buy for taking pallets apart, but personally I use traditional tools and use it as a fitness session!


Turn your pallet over, get a sturdy old flathead screwdriver, and use a hammer to gently loosen the struts on the underside of the pallet. Take your time and ease them and the nails up gently, as you want to keep this wood to use on the topside. Take off the bottom three struts on each of the two table pallets, and take the third pallet apart completely. Then have a sit down and a big glass of water!

 

Step 2 - Take the pallets apart.JPG

Step 3

Time to join the pallets together. Once you’ve stripped the bottom struts off, line up the two pallets with the topside facing down. Line up the outside and central wood beams exactly and get some strips of wood (ideally from the pallet you’ve taken apart) and use them to join the two pallets together. Use screws for this as using nails could damage the pallets.


Once you’ve joined the pallets in three or four places on the main wooden spines, then flip the whole thing over to start completing the table top.


At this stage you can also nail on a pallet strip at either end of the table so that there is an edge all the way round.

 

Step 3a - Join the pallets together.JPG  Step 3b - Pallets now joined.JPG

Step 4

With all the leftover pallet wood from underneath these two pallets and the third pallet, you want to start filling in the gaps on the table top. Measure the width of the gaps either side, as they won’t be uniform. Then draw the size it needs to be to fit onto the spare strip of wood.


Cut the strip to almost exactly the size you need, but slightly too big is better than way too small. Some small gaps are okay with this rustic look, but not too many. You can use a handsaw, but it is easier with an electric jigsaw or circular saw.

 

Step 4a - Measure the gaps.JPG  Step 4b - Cut strips to size.JPG

Step 5

Now shape each piece to fit. Ideally each strip of wood is just a tiny bit too big to fit in, so that you can shape it to fit exactly. Clamp each piece in a vice or small work table and use a plane to get it down to the exact size.


This process can take a while, but it’s hugely satisfying getting the strips to gradually fit. It’s like completing a jigsaw puzzle! And as you can see from my table, different types of wood are not a problem as they give a striking striped table top.

 

Step 5a - Shape each piece to fit.JPG  Step 5b - Fit each piece.JPG  Step 5c - Finish the jigsaw puzzle.JPG

Step 6

When you start sanding, the striking candy-striped effect will start to calm down a little and you’ll start to get some beautiful wood patterns. If you’re looking for a fancy table for inside dining, then you’ll want to make things super smooth and uniform. If this is for outside, then I just give a light sand. You just need to obviously take off rough edges and anything that can cause splinters. But by leaving plenty of texture and contrast, you get an effect that really makes you appreciate how beautiful, natural and unique wood can be.

 

Step 6a - Sand to desired finish.JPG  Step 6b - Ensure no rough edges.JPG

Step 7

How you approach the table legs will depend on what you want the table for. You can buy some beautiful legs at Bunnings for a really classy feel. Vintage black metal legs, pine legs or chrome legs can also all be used. If it’s for outside, I usually just try and use some off cuts of wood to continue the rustic and homemade look. For the four corners a square post is great to use, then I supplement that with any thick timber for the supporting middle legs. If there is paint on the off-cuts that doesn’t matter, just sand it back.

 

Step 7 - Table legs.JPG

Step 8

You can use brackets or more complex ways to fit legs, but I just use long galvanised bolts with nuts. I do this partly because I love the look of the bolt heads on the outside of the table - they add an industrial touch to the rustic table. Drill through the wooden struts and the table legs at different heights and at right angles to each other, then tighten the bolts with an adjustable spanner. This will be strong enough for everyday use, although I’d advise against dancing on the table top if a barbecue gets out of hand!

 

Step 8a - Use galvanised nuts and bolts.JPG  Step 8b - Tighten bolts with a spanner.JPG

Step 9

Next step is to varnish the table. For this I use a gloss or ultra-gloss oil-based varnish. Pour some from the tin into a plastic paint pot (a few centimetres deep) and then add a small capful of turps to loosen it. This makes it easier for brushing on. Take a paint brush and paint it on, going with the grain. It’ll take around 6 hours to dry. The more coats you do, the deeper and shinier the finish.


Alternatively, you can paint the table lightly in white paint and then sand the whole thing back to get a distressed antique wood finish. You could even paint the table in different colours - whatever you like. It’s a cheap table to experiment with.

 

Step 9a - Ready for varnishing.JPG  Step 9b - Varnish added.JPG

Step 10

When it comes to styling, if you add something classic and stylish and vintage, it seems to lift the table further. Vintage glassware and ornaments from Op Shops are a fun addition, or Bunnings has a great selection of outside plants and candles.
Congratulations if this is your first table. Now start making more for your friends and family. They make impressive and thoughtful gifts!

 

Step 10c - Enjoy.JPG  Step 10a - Finished table.JPG  Step 10b - Ready for styling.JPG 

Materials

  • Three pallets
  • 60mm nails
  • 60mm screws
  • 120mm nuts and bolts
  • Sandpaper
  • Full gloss varnish
  • Mineral Turpentine

Tools

  • Hammer
  • Long flathead screwdriver (or crowbar)
  • Tape measure (or ruler)
  • Pencil
  • Saw (preferably electric)
  • Drill
  • Plane
  • Adjustable spanner
  • Electric sander
  • Vice or clamps
  • Paintbrush
  • Paint pot

Images

Step 1 - Find suitable pallets.JPG

Step 2 - Take the pallets apart.JPG

Step 3a - Join the pallets together.JPG

Step 3b - Pallets now joined.JPG

Step 4a - Measure the gaps.JPG

Step 4b - Cut strips to size.JPG

Step 5a - Shape each piece to fit.JPG

Step 5b - Fit each piece.JPG

Step 5c - Finish the jigsaw puzzle.JPG

Step 6a - Sand to desired finish.JPG

Step 6b - Ensure no rough edges.JPG

Step 7 - Table legs.JPG

Step 8a - Use galvanised nuts and bolts.JPG

Step 8b - Tighten bolts with a spanner.JPG

Step 9a - Ready for varnishing.JPG

Step 9b - Varnish added.JPG

Step 10c - Enjoy.JPG

Step 10a - Finished table.JPG

 

5 Replies
stellaredvelvet
Just Starting Out

Hello. I’ve just joined, after searching the Bunnings website. I’m trying to find a pallet to make a craft project. Any suggestions where to source one as they don’t come up in a search on the Bunnings website. TIA 😊

MitchellMc
Bunnings Team Member
Bunnings Team Member

Welcome to the Bunnings Workshop community @stellaredvelvet. It's great to have you join us and many thanks for your question. 

 

You'll find most of our stores aim to recycle our timber pallets and often have them conveniently stored so customers can take them for projects. They will generally be kept to one side near our timber/trade and drive-thru sections. Next time when you're instore simply ask a team member in the timber yard if they had any spare pine pallets you could take. I'm sure they will be more than happy to assist.

 

We look forward to seeing what you create with the timber pallets and we'd encourage you to let us know if you need any assistance or if you would like to share the project with the community.

 

Please let me know if you need further assistance or had any questions.

 

Mitchell

 

Learner21
Just Starting Out

Hi, could you please let me know what paint/lacquer you used for the table. Thanks

MitchellMc
Bunnings Team Member
Bunnings Team Member

Welcome to the Bunnings Workshop community @Learner21. It's a pleasure to have you join us, and many thanks for your question about what coating was used on this project.

 

Let me mention @Peggers to see if he can answer that for you. However, he does mention that he used an oil-based gloss varnish, so you should see similar results with something like Bondall 500ml Ultra Gloss Monocel Clear Timber Varnish.

 

Do you have your own pallet table project in the works? We'd encourage you to start a discussion if you need any assistance or would like to share it with the community. We have plenty of knowledgeable members within the community that are all willing to lend a hand and share their expertise.

 

Please let us know if you have any questions.

 

Mitchell

 

Tyro
Becoming a Leader

You are a legend Peggers!  Your success is inspirational!  Thank you 💞😁👏

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects